Fermilab Redmine

03/26/2018

02:32 PM M3 IPM Bug #19502 (New): Excessive delay in first plot, capturing ACNET cursor in window

I33. Select RR H104. Load spec #10 (or any spec). Save and activate spec. After the spec has completed select "Da...

02/09/2018

10:11 AM Elog Idea #18921: There appears to be an auto-gain issue affecting returned data

I'm seeing the sigma fit to a fixed turn change based on the number of turns collected. Constant turn analyzed, cons...

02/08/2018

12:53 PM Elog Idea #18921 (Closed): There appears to be an auto-gain issue affecting returned data

With a constant MCP voltage I see a factor of 2 decrease in turn 100 between collecting the first 1,000 turns and col...

01/26/2018

03:32 PM M3 IPM Bug #18773: Single turn plot not showing current data until you toggle single turn -> charge plot -> single turn

David Slimmer wrote:
> Modified front end code so the Fit Turn is taken from R:4HPMTF instead of the spec when data ...

01/22/2018

11:31 AM M3 IPM Bug #18773: Single turn plot not showing current data until you toggle single turn -> charge plot -> single turn

Same behavior on the Z page.

10:22 AM M3 IPM Bug #18773 (Resolved): Single turn plot not showing current data until you toggle single turn -> charge plot -> single turn

Taking new data with the plot option of Single Turn shows old data until you toggle from Single Turn to Charge Plot a...

01/19/2018

09:25 AM M3 IPM Bug #18755 (New): Plotting Charge, Sigma and Turns does not scale to # Turns Analyzed.

Plotting for Charge, Sigma and Position scales axis for # Turns Acquired when showing plotting # Turns Analyzed. See...

01/05/2018

08:57 AM M3 IPM Feature #18631: IPM State does not change on I33

Elliott McCrory wrote:
> This issue has been fixed and is waiting for go-ahead to "mecca --commit" from MI folks.
>...

08:36 AM M3 IPM Feature #18631 (Feedback): IPM State does not change on I33

Why is this marked resolved? It is still broken. It still reads zero 100% of the time on I33 (it's real reading is ...

12/28/2017

11:53 AM M3 IPM Feature #18631: IPM State does not change on I33

Elliott McCrory wrote:
> Is the readback from the state device of the IPM not working? For example, running Spec 11...