Wiki » History » Version 1

Version 1/81 - Next » - Current version
Jose Ignacio Crespo Anadon, 06/18/2018 01:39 PM


How to run the DAQ for the BNL-Nevis integration test

1. Make sure the Nevis crate and NIM bin are powered. Experts: (on-site) Davio Cianci, (off-site) José I. Crespo (Skype:
2. ssh into the DAQ machine
Log into the SBND gateway

ssh -Y

Log into the LArIAT gateway

ssh -Y

Log into the DAQ server using the common sbnd account (reserved for DAQ)

ssh -Y sbnd@lariat-daq04

3. Go to the jcrespo/ directory

cd jcrespo

Run the DAQ-decoder-plotter script


and follow the instructions printed on screen. This script runs the DAQ in calibration mode (CALIB pulses are sent to the Magic Blue Box every 1 s) -- once you have collected the desired number of events, it requires you to stop the DAQ using CTRL + C twice --, then runs the binary decoder, and finally runs a ROOT analysis to plot the waveforms.