Project

General

Profile

Slowmoncon VNC connection Mac

See the instructions in the file vnc_for_MAC.pdf, attached to this page, taking note of the following:
  • It is now recommended to use ubdaq-prod-ws01 or ubdaq-prod-ws02 instead of ubdaq-prod-evb for running VNC.
  • The shared VNC server for slowmoncon shift work is run on ubdaq-prod-ws01:2. You don't need to start the vncserver for that, as it should already be running. Just connect to it with your vnc client using steps 3 and 4. (Ask someone for the password if you don't know.)

You can also use the instructions on the "slowmoncon VNC connection for linux" page, as the procedure is almost the same.