Project

General

Profile

Readout Electronics - Guide

There are several screens in the Online Monitor which contain information relevant to readout electronics. The first is the DAQ Status display, which can be accessed by right-clicking DAQStatus in the Alarms Panel and selecting Open DAQ Status display.

Alternatively, the shifter can use the Online Monitor's overview tab to open several relevant screens:

From the PMT/Trig screen, the shifter can then access the Power Supply overview screen:

In the DAQ status screen, the shifter should be aware of the XMIT status, highlighted in the following screenshot:

The shifter should also remain mindful of the Wiener power supply systems: