RC - Reconfigure ASICs

If you want to reconfigure ASIC for FT1 only, please exit the current run control script, and restart it with the expert mode as follows, expert

Choose the Config ID 538.

Config IDs exist also to reconfigure for only FT4 and FT9 (individually). They are:

FT4: 549
FT9: 548

With the expert mode, the run will not restart automatically, and you will hear the music (Verdi's requiem) when the run ends. At that time, please re-launch the run control script with the normal mode. I.e. quit the current run control script, do

Then choose the default Config ID listed in Run Plan.