RC - CalibrationFanout » History » Version 4
Yun-tse Tsai, 04/06/2016 12:20 PM
1 | 1 | Yun-tse Tsai | h1. RC - Calibration Fanout |
---|---|---|---|
2 | 1 | Yun-tse Tsai | |
3 | 1 | Yun-tse Tsai | h2. Calibration Fanout Panel |
4 | 1 | Yun-tse Tsai | |
5 | 1 | Yun-tse Tsai | * Start with the slow monitor, find the overview panel |
6 | 1 | Yun-tse Tsai | !SM.png! |
7 | 1 | Yun-tse Tsai | |
8 | 1 | Yun-tse Tsai | * Click the "Open Power Supply Overview Panel" button (dark purple) in the left bottom of the overview panel |
9 | 1 | Yun-tse Tsai | !SMOverview.png! |
10 | 1 | Yun-tse Tsai | |
11 | 1 | Yun-tse Tsai | * Click the "ASICS LV" button in the "TPC PS" rack in the middle right in the panel |
12 | 1 | Yun-tse Tsai | !PowerSupply.png! |
13 | 1 | Yun-tse Tsai | |
14 | 1 | Yun-tse Tsai | * Here is the ASICS LV panel |
15 | 1 | Yun-tse Tsai | !ASICLV.png! |
16 | 1 | Yun-tse Tsai | |
17 | 1 | Yun-tse Tsai | * Scroll it down, in the bottom there is the Calibration Fanout |
18 | 1 | Yun-tse Tsai | !CalibFanout.png! |
19 | 1 | Yun-tse Tsai | |
20 | 1 | Yun-tse Tsai | |
21 | 1 | Yun-tse Tsai | h2. Turn on/off the Calibration Fanout |
22 | 1 | Yun-tse Tsai | |
23 | 1 | Yun-tse Tsai | * Please follow the instruction in the green box in the top right of the panel: |
24 | 1 | Yun-tse Tsai | ** Power on: Turn on -3.3V channel (the left one) FIRST before turning on +3.3V channel (the right one). |
25 | 1 | Yun-tse Tsai | ** Power off: Turn off +3.3V channel (the right one) FIRST before turning off -3.3V channel (the left one). |
26 | 3 | Yun-tse Tsai | |
27 | 4 | Yun-tse Tsai | * After clicking the on/off button, you will have to enter the password: the first three alphabets in the English alphabet list in lower case, and the first three natural numbers (excluding zero). |
28 | 3 | Yun-tse Tsai | * It takes a couple of seconds for the slow monitor control to respond. The button may bounce on and off. Don't panic. Please wait. |