Project

General

Profile

RC - CalibrationFanout » History » Version 3

Yun-tse Tsai, 04/06/2016 12:22 AM

1 1 Yun-tse Tsai
h1. RC - Calibration Fanout
2 1 Yun-tse Tsai
3 1 Yun-tse Tsai
h2. Calibration Fanout Panel
4 1 Yun-tse Tsai
5 1 Yun-tse Tsai
* Start with the slow monitor, find the overview panel
6 1 Yun-tse Tsai
!SM.png!
7 1 Yun-tse Tsai
8 1 Yun-tse Tsai
* Click the "Open Power Supply Overview Panel" button (dark purple) in the left bottom of the overview panel
9 1 Yun-tse Tsai
!SMOverview.png!
10 1 Yun-tse Tsai
11 1 Yun-tse Tsai
* Click the "ASICS LV" button in the "TPC PS" rack in the middle right in the panel
12 1 Yun-tse Tsai
!PowerSupply.png!
13 1 Yun-tse Tsai
14 1 Yun-tse Tsai
* Here is the ASICS LV panel
15 1 Yun-tse Tsai
!ASICLV.png!
16 1 Yun-tse Tsai
17 1 Yun-tse Tsai
* Scroll it down, in the bottom there is the Calibration Fanout
18 1 Yun-tse Tsai
!CalibFanout.png!
19 1 Yun-tse Tsai
20 1 Yun-tse Tsai
21 1 Yun-tse Tsai
h2. Turn on/off the Calibration Fanout
22 1 Yun-tse Tsai
23 1 Yun-tse Tsai
* Please follow the instruction in the green box in the top right of the panel:
24 1 Yun-tse Tsai
** Power on: Turn on -3.3V channel (the left one) FIRST before turning on +3.3V channel (the right one).
25 1 Yun-tse Tsai
** Power off: Turn off +3.3V channel (the right one) FIRST before turning off -3.3V channel (the left one).
26 3 Yun-tse Tsai
27 3 Yun-tse Tsai
* After clicking the on/off button, you will have to enter the password: the first alphabet in the English alphabet list in lower case, and the first three natural numbers (excluding zero).
28 3 Yun-tse Tsai
* It takes a couple of seconds for the slow monitor control to respond.  The button may bounce on and off.  Don't panic.  Please wait.