Project

General

Profile

Online Monitor Config Parameters

The online monitor section of the config file contains parameters for the online monitor process on near1 (this is the process that runs the online monitor). An example of the full online_monitornear1 section of the config file is below (from config 681, PHYSICS_BNB_NUMI_MUCS_EXT6990mHz_SWTrigger_2Stream_LowThreshold50_c2.fcl), with explanations of what the parameters mean.

online_monitornear1: [  {
  dispatcherHost : "ubdaq-prod-evb-priv" 
  dispatcherPort : 2013
  doStripRequests : 1
  newFileOnSubrunChange : 0
  numiResistiveWallMonitor_thigh : 845
  numiResistiveWallMonitor_tlow : 825
  outputDirectory : "/datalocal/om" 
  plexusPmtSource : "sqlite /uboonenew/online_database/plexus13.db" 
  plexusTpcSource : "postgres host=ifdbprod2.fnal.gov user=uboonedaq_web port=5444 db=hootgibson_prod password=argon!uBooNE" 
  plexusTpcSource_fallback : "sqlite /uboonenew/online_database/plexus13.db" 
  resistiveWallMonitor_thigh : 345
  resistiveWallMonitor_tlow : 335
  timeBetweenWrites : 120
  writeAfterFirstEvents : 1
}  ]
  • dispatcherHost: Where is the dispatcher hosted? Currently on evb.
  • dispatcherPort:
  • doStripRequests:
  • newFileOnSubrunChange:
  • numiResistiveWallMonitor_thigh/tlow: Set alarm thresholds for NuMI RWM timing. If the time reported is outside these bounds, errors will be reported.
  • outputDirectory:
  • plexusPmtSource:
  • plexusTpcSource:
  • plexusTpcSource_fallback:
  • resistiveWallMonitor_thigh/tlow: Set alarm thresholds for BNB RWM timing. If the time reported is outside these bounds, errors will be reported.
  • timeBetweenWrites:
  • writeAfterFirstEvents: