OM - Overview » History » Version 28

« Previous - Version 28/36 (diff) - Next » - Current version
Peter Watkins, 05/29/2015 10:59 AM

OM - Overview

current link:
No current data, so nothing relevant should load on home page.

The Monitor Lizard is continually taking data from the dispatcher and creating histograms in a 'current' root file. Users can stay on the main page, and it will automatically update to the most recent file with a latency of a few minutes. This web browser interface will allow shifters to easily inspect histograms with reference plots, to ensure the detector is operating normally.



To quickly get to the histogram that you are interested in, use the Navigation block on the far left.

This works exactly like a list that you can expand or collapse to explore the current file.


Once you have found the histogram you are interested in you have many options.
Each box has an expand, print, and minimize option in right corner of title bar.
-Can also save plot as image (using right-click, double finger click, or screen grab)
Press title bar to show only that box on a page.
-Or use navigation for same effect
User can grab an pull axis of plots to zoom in/out.
Press (l) or logscale check box to logscale plot.
Press (f) or fill check box to fill plot.
Press (b) or reference on top check box to place a reference plot on top of current plot.
Press (r) or reset button to return to original plot settings.
Drag and pull data to scroll horizontally.
Running cursor over plot gives x-axis location and y-axis hight for that bar of data, respectively, given by content which appears under the plot.

Under mapccc and mapwire under tpc:
Run cursor over crates/planes to magnify channels/wires and give a value.
-Or click on individual channel/wire to bring up individual plots and data
User can pull to adjust axis and scroll on bar plots in order to zoom on areas of interest, plots above adjust to show corresponding data.
Colors specify to specific numbers given by bar plot.
-Generally the hotter the color the more interactions


File Browser

Users can use the file browser tab at the top of the page in order to look at old data for comparisons

Navigation by URL (in progress)

You may also note the change in the URL. Something like would take you to run 1 subrun 6. would take you to run 1 subrun 6 and run 1 subrun 5. would take you to run 1 subrun 6 but stright to the pmt data
Some will find this to be a faster means of navigation.

Questions you might have:
What is underflow/overflow?

Date that goes outside the bounds of the plot (should almost always be zero)

What is checksum?

A check to make sure the data does not get truncated or stops being recorded appropriately

What is GPS vs crate time?

A check to make sure the timestamps match; the plot gives the difference in time if any

What is bad/unpack results?

A check to ensure the data is being organized correctly (should be flat)

What does NaN mean?

Not a Number; undefined

What do ADC and TDC mean?

Analog Digital Converter and Time Digital Converter; units of measurement

What is pedestal corrected?

Fitting the data around zero instead of the mode of distribution

What do the hits over pedestal and fraction of samples over pedestal plots represent?

They indicate problems with channels; if there is a large amount, the channel is noisy, if there is a zero the channel is dead

What is readout occupancy?

How many hits per channel (should always be the same)

What is a discriminator?

When a trigger for one PMT fires

What is last recorded waveform?

It adds all waveforms from the last event in the whole detector

What is a window?

1.6 us; a snapshot of the TPC and the time it takes to sweep the detector out once; also referred to as a readout window

What is a frame?

A full window before and after an event along with the event window

What is a trigger?

What cues the machines to record once above/below a certain threshold; for the detector, generally the beam; for a PMT, generally dark noise or cosmics

What does beam window per channel per record mean?

How many beam seen per record (should be 0-1)

What is a gate?

The same thing as a record or event

What is a PMT card trigger stamp or a trigger card at 16MHz?

The time the card thought the trigger started; another time check

What is optical pulse time?

The time of the pulse according to a PMT

What does a weighted pulse height do?

It shows the big pulses more than the small pulses

What does the frame diff plot show?

The frame according to the PMT compared to the trigger; checks the synchronization (should always be diagonal and be within a two block width)

What is integrated charge?

The total charge seen in the detector, averaged

What is BNB?

Booster Neutrino Beam

print full page->remove
helps and hints tab->redirect to wiki
reference not found->find suitable references
non-scaling reference and leaving marks on plot
logscale option missing from mapwire
add vertical indicator under cursor to make sense of content
or painting a region to have it give a value
no reset button on mapccc
no rest or logscale buttons on mapwire
no logscale for triggerflag correlation matrix or framediffs bin contents
> scale y-axis for now
no calib on x-axis^
not helpful descriptions under TPC and PMT plots
reset on pmt summed wave form erases y-axis
add frame number
double click on logscale for tpc waveform makes plot overflow
>press reset for now
negative numbers in exponential when they don't need to be
sibling plot buttons
navigation expands too much and throws a single plot at the top you have to scroll to see->click the title in navigation again for now
show first sigfig on mean
PMT peak time instead of optical pulse time?