Cathode High Voltage - Guide » History » Version 2

« Previous - Version 2/4 (diff) - Next » - Current version
Sarah Lockwitz, 10/21/2015 03:08 PM

Cathode High Voltage - Guide

What to do if....

Bringing up the Monitoring

On the overview screen, click the "Open Power Supply Overview Panel":

Now click the "HV Panel" button:

This will bring up the TPC Drift High Voltage Monitoring Panel.

If the voltage reads zero when it should be non-zero, call the HV expert. If non-zero current (uB_TPCDrift_HV01_1_0/current) is observed, call the HV expert.