Project

General

Profile

ASIC Config Parameters

This section of the config file sets the ASIC configuration. ASIC configuration is slow and takes a long time - most of the time we do not need to reconfigure the ASICs and so this section of the config file will look like this:

ASIC: [  {
  FT10_P0:{
    reconfigure : false
  }
  FT10_P1:{
    reconfigure : false
  }
  FT11_P0:{
    reconfigure : false
  }
  FT11_P1:{
    reconfigure : false
  }
  ... repeated for P0 and P1 on FT0 - FT10 ...
}  ]

However, when we turn the power on or if you need a special ASIC configuration, we will want to reconfigure the ASICs. Instructions on how to set the config parameters to do that are given in the Expert Default ASIC Configuration page