Project

General

Profile

Spent time

Filters

Apply Clear

Hours: 35.15

Date User Activity Issue Comment Hours
10/02/2015 Glenn Horton-Smith Implementation Bug #9048: Remove spare TPC PS LV channels from the Alarm system 0.10
06/05/2015 Glenn Horton-Smith Administration Feature #9022: add Wiener internal temperatures, "behavior" variables to archive 0.10
06/05/2015 Glenn Horton-Smith Administration Bug #9037: Relax the MINOR High/low alarm range on TPCPS LV modules 1 through 6 0.10
04/16/2015 Glenn Horton-Smith Administration Bug #8179: On slowmon CSS overview panel, fix order of LSR1, LSR2, PM3, and Cryo racks 0.10
02/18/2015 Glenn Horton-Smith Deployment Necessary Maintenance #7866: Check on TPC R4 fanpack Connector was loose, now fixed. 0.10
02/13/2015 Glenn Horton-Smith Testing Necessary Maintenance #7551: Check temperature probe #2 in LASER-1 rack Thomas reseated a connector and all became well. 0.10
06/09/2015 Glenn Horton-Smith Administration Feature #9022: add Wiener internal temperatures, "behavior" variables to archive 0.20
06/05/2015 Glenn Horton-Smith Administration Bug #9038: Relax Major/Minor low alarm for calibration channels to 0.4A instead of 0.5A 0.20
05/15/2015 Glenn Horton-Smith Administration Necessary Maintenance #8149: review all our read-only cryogenics status alert ranges 0.20
05/15/2015 Glenn Horton-Smith Deployment Necessary Maintenance #8367: Add and archive channels for feedthrough temperatures, heaters 0.20
10/02/2015 Glenn Horton-Smith Administration Support #10377: Adjust rack temperature alarm ranges to be consistent with steady running 0.30
10/09/2015 Glenn Horton-Smith Implementation Feature #10425: Flasher and calibration board power should normally be off, set alarm ranges accordingly, except current 0.50
10/06/2015 Glenn Horton-Smith Implementation Support #10384: Restore low voltage channel 506 (flasher supply) to alarm system 0.50
10/05/2015 Glenn Horton-Smith Implementation Feature #9212: Add NuMI horn current to things we monitor in Beam subsystem 0.50
06/05/2015 Glenn Horton-Smith Administration Bug #9035: remove non-existant rack air temperature variables from EPICS DB 0.50
06/05/2015 Glenn Horton-Smith Administration Bug #9021: Remove non-existent fan pack from slow controls for ELIZabeth and TPC5 racks 0.50
06/01/2015 Glenn Horton-Smith Deployment Bug #8989: Archived data not shown on rack fan speed and temperature panels 0.50
06/01/2015 Glenn Horton-Smith Testing Bug #8989: Archived data not shown on rack fan speed and temperature panels 0.50
04/22/2015 Glenn Horton-Smith Testing Feature #8143: Test and document use of EPICS channel save/restore tool Now demoed to Sowjanya and Matt, plan to use it approved. 0.50
04/13/2015 Glenn Horton-Smith Administration Bug #8332: Add more Wiener channels to archiver 0.75
10/22/2015 Glenn Horton-Smith Implementation Feature #10426: Don't alarm some uB EPICS beam channels when beam current low New IFBeamData reader code 1.00
10/17/2015 Glenn Horton-Smith Implementation Feature #10467: Add DAQ's "Builder-Frame_Counter_Diff_Max_Aassemblerappevb" metric to slowmon 1.00
10/02/2015 Glenn Horton-Smith Implementation Feature #9080: Add Rack Protection Status latch and overtemp status latch to rack monitor IOC 1.00
10/02/2015 Glenn Horton-Smith Administration Support #10376: Adjust purity monitor alarm ranges, add new calculations 1.00
06/05/2015 Glenn Horton-Smith Implementation Feature #9066: Secure Wiener write-access with new community name 1.00
(1-25/34) Per page: 25, 50

Also available in: Atom CSV