Project

General

Profile

R009 » History » Version 3

Kenichi Nakano, 11/19/2018 06:30 PM

1 1 Kenichi Nakano
h1. R009
2 1 Kenichi Nakano
3 1 Kenichi Nakano
Last update on 2018-11-19 by Kenichi.
4 1 Kenichi Nakano
5 1 Kenichi Nakano
This production will include the FY2017 dataset and be processed with our local computers.
6 1 Kenichi Nakano
7 1 Kenichi Nakano
Some info in this page is +not correct+ for now.  Being written...
8 1 Kenichi Nakano
9 1 Kenichi Nakano
h2. Information on R009 Production
10 1 Kenichi Nakano
11 1 Kenichi Nakano
* The good runs are listed in "/data2/production/list/R009/R009_fy2017.list".
12 1 Kenichi Nakano
** The reasons for good/bad schemas are described in "00readme.txt".
13 1 Kenichi Nakano
** The format (columns) of this list file is a bit different from R008 etc.
14 1 Kenichi Nakano
* Decoder
15 1 Kenichi Nakano
** git hash
16 1 Kenichi Nakano
* Data quality check ... "Spill.dataQuality" field
17 1 Kenichi Nakano
** +Not done yet+.
18 1 Kenichi Nakano
** The criteria is identical to R007.  Details can be found in the Git repository ("spillDQRunSchema.py, 606a858a451be9a585ec86ce0434221a812ef7d9":https://cdcvs.fnal.gov/redmine/projects/seaquest-decoding/repository/revisions/606a858a451be9a585ec86ce0434221a812ef7d9/entry/SpillDQ/spillDQRunSchema.py).
19 1 Kenichi Nakano
** The set of "good" spills is different from R007 because of a requirement of "N of tracks/spill > 0.
20 1 Kenichi Nakano
** The "Spill.dataQuality" field was set accordingly on May 17.
21 1 Kenichi Nakano
** Analyzer can use the lists of good spills in "/data2/production/list/R008/good_spill_*.list" instead.
22 1 Kenichi Nakano
* Chamber intensity ... "QIE.Intensity(_p)" field
23 1 Kenichi Nakano
** +Not done yet+.
24 1 Kenichi Nakano
** Identical to R007.  Details can be found in the Git repository ("AddIntensityFieldRunSchema.py, b47c94ad1f20ff8ba8f8c8d5cf4a74be5dbe1188":https://cdcvs.fnal.gov/redmine/projects/seaquest-production/repository/revisions/b47c94ad1f20ff8ba8f8c8d5cf4a74be5dbe1188/entry/IntensityCorrection/AddIntensityFieldRunSchema.py).
25 1 Kenichi Nakano
** The run schemas included in not R007 but R008 were updated on May 17.
26 1 Kenichi Nakano
* kTracker
27 3 Kenichi Nakano
** +Not done yet+.
28 1 Kenichi Nakano
** The version used is stored in the "kInfo" table.
29 1 Kenichi Nakano
30 1 Kenichi Nakano
h2. Details about use of our local computers
31 1 Kenichi Nakano
32 3 Kenichi Nakano
* Computers used
33 3 Kenichi Nakano
** e906-gat2, e906-gat4, e906-gat6 (for now?)
34 3 Kenichi Nakano
* Decoder parameters
35 3 Kenichi Nakano
** Event sampling = 1 (except FPGA2), FPGA2-event sampling = 100
36 1 Kenichi Nakano
* Procedure
37 1 Kenichi Nakano
** run-local-production.sh
38 1 Kenichi Nakano
** check-schema-size.sh
39 1 Kenichi Nakano
** summarize-local-production.cc
40 3 Kenichi Nakano
* Test #1 - 2018-11-20
41 3 Kenichi Nakano
** 299 runs on 3 computers, as listed in /data2/production/list/R009/test_local/test_local_gat*.list
42 3 Kenichi Nakano
** The decoder exit status of all the runs is OK (i.e. has reached the end of the program).
43 3 Kenichi Nakano
** Statistics
44 3 Kenichi Nakano
*** The averaged process time = 6149 sec/run ... The process time per input Coda size (sec/MB) is shown in the attachment "h1_t2si.png".
45 3 Kenichi Nakano
*** Input Coda size = 3143 MB/run on average
46 3 Kenichi Nakano
*** Output ROOT size = 637 MB/run on average
47 3 Kenichi Nakano
*** Output / input size = 0.20 on average ... The distribution is shown in the attachment "h1_so2si.png".  The runs below 0.1 might have a problem.