Information on R006_V003 Production

This V003 version was established on 2017-Mar-30.

Status & plan: As of 2017-Mar-30

Ready for analysis. No update is planned.

Important notes
  • Updates from V001
    • The data of about 200 runs have been updated to resolve the inconsistency between the event info and the kTrack info.
    • The "QIE.PotPerQie" field has been added, which means "the number of protons on target per QIE count".
      • The "Intensity_p" field is equal to "Intensity * PotPerQie".
      • One can compute the PoT of triggered bucket at "RF+00 * PotPerQie" by not using G2SEM, QIEsum and the QIE pedestal.
      • It might be "null" unless you require "Spill.dataQuality = 0".
  • The merged schemas (merged_roadset*_R006_V003) on DB2 ( & DB3 ( are complete for analysis.
    Do not use them on UIUC at present.

Latest datasets
  • Real data
    Schema name

  • Geometry
    • The "Planes" table didn't change from "geometry_G15_run3" to "geometry_G17_run3".
    • The "PlaneOffsets" table changed. The table in "geometry_G17_run3" is consistent with the alignment file.
    • Physics analyses should use "geometry_G17_run3" on both real data & GMC production.
      Dataset 2 Dataset 3
      Real data geometry_G22_run2B & alignment file geometry_G15_run3 & alignment file
      GMC production n/a geometry_G17_run3

  • Real data
    • Coda-file decoding
      • The target position (i.e. "Spill.targetPos" field) during the manual target cycle (in roadset 62) have been corrected according to doc1713-v2. The correction was made on run-by-run schemas. Kun will run kTracker again to include the updated target position into the "kDimuon.targetPos" field.
    • Track reconstruction
      • No open issue.
    • Run-by-run schema
    • Schema merging
    • Data-quality check
      • No open issue.
  • GMC
    • The GMC productions described here have been produced with the same conditions as the R006 real data, and thus are suitable for R006 analyses.
    • Production ... being produced by BZ (and Shivangi)
      • mc_drellyan_LH2_M017_S001 and the like were run with the wrong magnetic field parameters. They are being rerun.
      • Shivangi has been learning how to run GMC and is submitting GMC productions to the grid.
      • After the LH2 and LD2 productions are finished we will start submitting the other jobs.
      • Some of new productions might not be necessary if their physics process configuration is not changed.
        Then a question is how we run the R006 kTracker on them and store its output.
    • Track reconstruction ... waiting for the production finished

  • 2017-03-29: Updated. R006_V003 should be ready for analysis.
  • 2017-03-03: This page was copied from V001.

Useful links