Project

General

Profile

v05.12.01.MCC 03/08/2017 Release Notes

sbndcode v05_12_01_MCC Release Notes

list of sbndcode releases

Purpose

Frozen for MCC 0.5

New features

Bug fixes

Updated dependencies

Change List

sbndcode v05_12_01_MCC

  • 2017-03-01 Thomas Brooks : Merge branch 'release/v05_12_01_MCC'
  • 2017-03-01 Thomas Brooks : Version v05_12_01_MCC
  • 2017-01-13 Dominic Barker : Addition of +0.5 in line 354 in SimWireSBND_module.cc to account for the discrepancy in the pedestal of the raw digit
  • 2017-01-05 Dominic Brailsford : Merge branch 'develop' of ssh://cdcvs.fnal.gov/cvs/projects/sbndcode into develop
  • 2017-01-05 Dominic Brailsford : correct typo (missing p from physics)
  • 2016-12-27 Michelle Stancari : lingering T053 removed
  • 2016-12-27 Michelle Stancari : update
  • 2016-12-27 Michelle Stancari : update
  • 2016-12-22 Dominic Brailsford : Generate one of 4 muons which start the front corners of the TPC and aim towards to corner opposite. The setup is such that when all 4 muons are considered together, every wire in the TPC should be hit. The muons are not all fired at the same time in the same event; one is chosen at random!
  • 2016-11-25 Dominic Brailsford : Rename the fcl file so that it correctly says 5 GeV rather than 3 GeV
  • 2016-11-24 Dominic Brailsford : Actually, that should be a 1 degree opening angle
  • 2016-11-24 Dominic Brailsford : Add gen-level fcl file which makes muons fired from a common vertex with a 1.5 degree opening angle.
  • 2016-11-22 Dominic Brailsford : Add gen-level fcl files for contained muons, pi+, electrons and photons (proton already committed)
  • 2016-11-21 Dominic Brailsford : Add a genie fcl file which can be easily run interactively. Add a genie fcl directory for the mcc.
  • 2016-11-21 Dominic Brailsford : Add a fcl file to produce contained protons Add a fcl file to run anatree such that the reco branches are filled
  • 2016-11-21 Dominic Brailsford : Comment out the merge conflict lines (don't want to delete them in case they are there for a reason...)
  • 2016-11-21 Dominic Brailsford : Merge branch 'develop' into feature/dbrailsf_mcc1.0
  • 2016-11-21 Dominic Brailsford : Include genie directory
  • 2016-11-19 Michelle Stancari : set lifetime to 3 ms instead of 0.75 ms (default)
  • 2016-11-19 Michelle Stancari : one more file that has 2500 ticks hardcoded
  • 2016-11-19 Michelle Stancari : lengthened readout window from 2500 to 3000 ticks because tracks near the cathode were being chopped.
  • 2016-11-18 Michelle Stancari : merge conflicts removed
  • 2016-11-18 Michelle Stancari : New signal simulation implemented, downstream reco modules adjusted as necessary
  • 2016-11-18 Michelle Stancari : Merge remote-tracking branch 'origin/feature/jyoti_sim' into feature/jyoti_sim
  • 2016-11-17 Michelle Stancari : calorimetry tuned area method only
  • 2016-11-17 Michelle Stancari : calorimetry tuned; area method only
  • 2016-11-17 Michelle Stancari : noise tuned
  • 2016-11-10 Michelle Stancari : tune thresholds
  • 2016-11-10 Michelle Stancari : fine tuning
  • 2016-11-10 Michelle Stancari : bug fix
  • 2016-11-10 Michelle Stancari : bug fix
  • 2016-11-10 Michelle Stancari : turned noise on
  • 2016-11-09 Michelle Stancari : updates
  • 2016-11-09 Michelle Stancari : updates
  • 2016-11-09 Michelle Stancari : updates
  • 2016-10-27 Michelle Stancari : more tuning
  • 2016-10-26 Michelle Stancari : tuned raw signal amplitudes
  • 2016-10-25 Michelle Stancari : bug fixed
  • 2016-10-25 Michelle Stancari : fix bug in collection plane filter params
  • 2016-10-21 Andrzej Szelc : fix detsim collection problem - too wide, shifted. leaving some debuggin couts for now. calwire still no go
  • 2016-10-17 Jyoti Joshi : Changing back the U-plane field response
  • 2016-10-10 Jyoti Joshi : Updating field response for U-Plane
  • 2016-10-07 Jyoti Joshi : Added some fhicl changes recommended by Michelle
  • 2016-09-26 Jyoti Joshi : Updating ADCPerPCAtLowestASICGain parameter
  • 2016-09-26 Jyoti Joshi : Modify simulation fhicl file
  • 2016-09-26 Jyoti Joshi : Modify simulation fhicl file
  • 2016-07-25 Jyoti Joshi : Modifying response implementaion
  • 2016-07-25 Jyoti Joshi : Updates to CalWire
  • 2016-07-21 Jyoti Joshi : CalWire updates
  • 2016-07-21 Jyoti Joshi : Updating filter parameters
  • 2016-07-21 Jyoti Joshi : Updating Response function implementation
  • 2016-07-15 Jyoti Joshi : Fixing typos and debugging
  • 2016-07-15 Jyoti Joshi : Updating noise model similar to random white noise
  • 2016-07-08 Jyoti Joshi : Modifying code to read all three planes
  • 2016-07-07 Jyoti Joshi : Modifications to SimWire code
  • 2016-07-07 Jyoti Joshi : Upating and debugging code for compilation
  • 2016-07-01 Jyoti Joshi : Adding Field Response function from histogram
  • 2016-07-01 Jyoti Joshi : Updating SignalShaping
  • 2016-07-01 Jyoti Joshi : Updating electronics response function
  • 2016-07-01 Jyoti Joshi : Updating electronics response function
  • 2016-11-17 Michelle Stancari : calorimetry tuned area method only
  • 2016-11-17 Michelle Stancari : calorimetry tuned; area method only
  • 2016-11-17 Michelle Stancari : noise tuned
  • 2016-11-10 Dominic Brailsford : Add 5th MCC 1.0 fcl file - prodsingle_electron_50-300MeV_fixposcentertpc1_isotropicangle.fcl
  • 2016-11-10 Dominic Brailsford : Add fourth MCC 1.0 fcl file - prodsingle_gamma_50-300MeV_fixposcentertpc1_isotropicangle.fcl
  • 2016-11-10 Dominic Brailsford : Minor alteration to start positions. Centre of each TPC is not +-100 exactly. I guess because the cathode gets in the way...
  • 2016-11-10 Dominic Brailsford : Add third MCC 1.0 fcl file - prodsingle_mu_3GeV_uniformupstream_fixangleforwardgoing.fcl
  • 2016-11-10 Dominic Brailsford : Add second fcl file for MCC - prodsingle_mu_1.5GeV_fixposapacross_gaus10degree.fcl
  • 2016-11-10 Dominic Brailsford : Change name of first fcl file to better distinguish from other fcl files to come
  • 2016-11-10 Dominic Brailsford : Add first MCC 1.0 fcl file (yay) -prodsingle_mu_1.5GeV_fixpos_gaus10degree.fcl
  • 2016-11-10 Michelle Stancari : tune thresholds
  • 2016-11-10 Michelle Stancari : fine tuning
  • 2016-11-10 Michelle Stancari : bug fix
  • 2016-11-10 Michelle Stancari : bug fix
  • 2016-11-10 Michelle Stancari : turned noise on
  • 2016-11-09 Michelle Stancari : updates
  • 2016-11-09 Michelle Stancari : updates
  • 2016-11-09 Michelle Stancari : updates
  • 2016-10-27 Michelle Stancari : more tuning
  • 2016-10-26 Michelle Stancari : tuned raw signal amplitudes
  • 2016-10-25 Michelle Stancari : bug fixed
  • 2016-10-25 Michelle Stancari : fix bug in collection plane filter params
  • 2016-10-21 Andrzej Szelc : fix detsim collection problem - too wide, shifted. leaving some debuggin couts for now. calwire still no go
  • 2016-10-17 Jyoti Joshi : Changing back the U-plane field response
  • 2016-10-15 Michelle Stancari : Update Calo fcl parameters
  • 2016-10-10 Jyoti Joshi : Updating field response for U-Plane
  • 2016-10-07 Jyoti Joshi : Added some fhicl changes recommended by Michelle
  • 2016-10-03 Dominic Brailsford : Add a fcl folder to sbndcode which gets copied to the source when installing. This will make it a lot easier for the mcc scripts to construct the xml files (e.g. find each fcl file in the gen fcl directory and make a project for each one)
  • 2016-09-29 Gianluca Petrillo : Updated basic reconstruction configuration: tracking
  • 2016-09-26 Jyoti Joshi : Updating ADCPerPCAtLowestASICGain parameter
  • 2016-09-26 Jyoti Joshi : Modify simulation fhicl file
  • 2016-09-26 Jyoti Joshi : Modify simulation fhicl file
  • 2016-07-12 Gianluca Petrillo : Adding simulation services into event display configuration.
  • 2016-08-18 Gianluca Petrillo : Added reference to cosmic ray documentation in wiki
  • 2016-08-17 Gianluca Petrillo : Added CRY configuration by Roxanne Guenette.
  • 2016-08-17 Gianluca Petrillo : Added Corsika configuration by Roxanne Guenette.
  • 2016-07-25 Andrzej Szelc : fix grid submission for prodsingle
  • 2016-07-25 Jyoti Joshi : Modifying response implementaion
  • 2016-07-25 Jyoti Joshi : Updates to CalWire
  • 2016-07-21 Gianluca Petrillo : Updated prodsingle_sbnd_proj.fcl
  • 2016-07-21 Jyoti Joshi : CalWire updates
  • 2016-07-21 Jyoti Joshi : Updating filter parameters
  • 2016-07-21 Jyoti Joshi : Updating Response function implementation
  • 2016-07-20 Gianluca Petrillo : AnalysisTree module can now use reconstructed tracks
  • 2016-07-19 Gianluca Petrillo : Fixed job configuration for analysis tree
  • 2016-07-15 Jyoti Joshi : Fixing typos and debugging
  • 2016-07-15 Jyoti Joshi : Updating noise model similar to random white noise
  • 2016-07-08 Jyoti Joshi : Modifying code to read all three planes
  • 2016-07-08 Andrzej Szelc : Merge branch 'develop' of ssh://cdcvs.fnal.gov/cvs/projects/sbndcode into develop
  • 2016-07-08 Andrzej Szelc : small tweak to grid launhcing job
  • 2016-07-07 Gianluca Petrillo : Updated more job configuration files
  • 2016-07-07 Jyoti Joshi : Modifications to SimWire code
  • 2016-07-07 Jyoti Joshi : Upating and debugging code for compilation
  • 2016-07-01 Jyoti Joshi : Adding Field Response function from histogram
  • 2016-07-01 Jyoti Joshi : Updating SignalShaping
  • 2016-07-01 Jyoti Joshi : Updating electronics response function
  • 2016-07-01 Jyoti Joshi : Updating electronics response function
  • 2016-07-01 Andrzej Szelc : add landed file conversion job script
  • 2016-07-01 Andrzej Szelc : small edits to efield and evd setting to resolve bugs found by Michelle
  • 2016-06-27 Gianluca Petrillo : Restored the correct name of CalWire module instance
  • 2016-06-24 Corey Adams : Merge tag 'v05_12_01' into develop

sbndutil v01_14_00_MCC

  • 2017-03-01 Thomas Brooks : Merge branch 'release/v01_14_00_MCC'
  • 2017-03-01 Thomas Brooks : Version v01_14_00_MCC
  • 2017-03-01 Thomas Brooks : Initial commit
  • 2017-02-23 Dominic Brailsford : Reset the project name to that of the default project for each iteration of an MCCSTATEMENT. This stops the new project append being appended to the previous MCCSTATEMENT project
  • 2017-02-22 Dominic Brailsford : Also reset newxml to the default project when making the default project's xml
  • 2017-02-22 Dominic Brailsford : Reset the newprj variable back to that of the default project when making the default project xml
  • 2017-02-22 Dominic Brailsford : Change the structure of the xml quite a bit with hacks on top of hacks on top of hacks. There is now functionality between the fcl file and this xml generation script to create monte carlo samples which use a generator fcl file as usual but also uses non-standard downstream fcl files. Necessary to make similar MC samples with variation in noise, electron lifetime, to run filters etc.
  • 2017-02-22 Dominic Brailsford : Make the XML printing bit into a function. Remove some stages such as reco2D and opsim.
  • 2017-02-16 Dominic Brailsford : Store the request file for the 110m baseline gsimple files
  • 2017-02-16 Dominic Brailsford : Store the beam flux generation xml file
  • 2017-02-13 Dominic Brailsford : Add XML files used in MCC 0.5
  • 2016-11-21 Dominic Brailsford : Reorder directories
  • 2016-11-21 Dominic Brailsford : Fix a couple of directory mislabels
  • 2016-11-21 Dominic Brailsford : Point the anatree stage towards the new mcc fcl file
  • 2016-11-21 Dominic Brailsford : Update fcl names for reco and anatree
  • 2016-11-15 Dominic Brailsford : Add a xml file for the pre-MCC
  • 2016-10-26 absolution1 : Fix userdir userbase bug. Change all work dirs to be on dcache rather than bluarc
  • 2016-10-26 absolution1 : change directory from scratch to persistent
  • 2016-10-26 absolution1 : Change mcc6.0 to mcc1.0
  • 2016-10-26 absolution1 : Add CLI switch to change the qualifier. The script now no longer assumes prof so one needs to specify (for example) -q e9:prof
  • 2016-10-11 Dominic Brailsford : Point the script towards $SBNDCODE_DIR rather than $UBOONECODE_DIR and also change the hardwired qualifier (this really needs to be not-hardwired)
  • 2016-06-16 Andrzej Szelc : Merge branch 'develop' of ssh://cdcvs.fnal.gov/cvs/projects/sbndutil into develop
  • 2016-06-16 Gianluca Petrillo : Renaming sbndutil UPS package
  • 2016-06-16 Andrzej Szelc : rename lar1nd->sbnd