SBND detector geometry¶
Detector description files are stored in GDML format in the
The file name is
<PATCHLEVEL> is reported in the namesake column of the table below).
The "standard" configuration of SBND geometry is contained in the
sbnd_geometry_services configuration bundle, and in particular in the
sbndcode/Geometry/geometry_sbnd.fcl file. The name of the GDML file loaded by LArSoft geometry is printed on the console when the
Geometry service is initialised or updated.
A "no wires" version is present for each regular one, which has no TPC wires. This special file is not processed by LArSoft geometry but is intended to be used for Geant4 simulation, where the presence of wires has been shown to strongly slow down the simulation for little physics gain.
Versions prior to 1.0 are not documented here.
|Series||Variant||Patch level||Description||Present in
|1||By Gustavo Valdiviesso|
|1.0||Two TPCs, with CRT, without overburden|
||(bugged baseline: no CPA and APA)||v06_46_00 to v06_47_00||v06_46_00 to v06_48_00|
||baseline + overburden|| v06_48_00_MCC to
|| v06_64_00 to
|By Marina Reggiani-Guzzo|
||v08_13_00||v08_35_00 to v08_36_01|