NEW REPOSITORY LOCATION¶

Note that the central hosting of this repository is now at Github at https://github.com/SBNSoftware. Writes to the redmine repository are now disallowed.

See the new wiki at https://sbnsoftware.github.io/sbndaq_wiki/Wiki.

Wiki¶

• Table of contents
• NEW REPOSITORY LOCATION
• Wiki
  • List of systems and components
  • Installation instructions
  • Running DAQInterface
  • Checking multicast request sending/receiving
  • Grafana Instructions
  • Jenkins Instructions
  • artdaqDriver program
  • Installing and running with new versions of Wibtools
  • ICARUS Noise Measurement (Interim DAQ interface and online monitoring)
  • Rebuild the windriver package
  • Building and cutting a release
  • Sending data to graphite and viewing it in grafana
  • Wish List and Requirements for SBN artdaq Based Run Control
  • ICARUS TPC Vertical Slice Test
  • How to rsync products from FNAL to your local institution
  • How to configure WIB and FEMB at D0 using python scripts
  • Setting up your account for ssh access to private network connections
  • How to setup White Rabbit switch, server nodes and beam signals distribution
  • Bringing systems back online at DAB
  • Troubleshooting
  • Other useful links
    • Changing and adding artdaq configurations
    • Notes

List of systems and components¶

Installation instructions¶

Running DAQInterface¶

Checking multicast request sending/receiving¶

Grafana Instructions¶

Jenkins Instructions¶

artdaqDriver program¶

Installing and running with new versions of Wibtools¶

ICARUS Noise Measurement (Interim DAQ interface and online monitoring)¶

Rebuild the windriver package¶

Building and cutting a release¶

Sending data to graphite and viewing it in grafana¶

Wish List and Requirements for SBN artdaq Based Run Control¶

ICARUS TPC Vertical Slice Test¶

How to rsync products from FNAL to your local institution¶

How to configure WIB and FEMB at D0 using python scripts¶

Setting up your account for ssh access to private network connections¶

How to setup White Rabbit switch, server nodes and beam signals distribution¶

Bringing systems back online at DAB¶

• Turn on the WIENER
• RIGOL power supply for the WIB and FEMBs

Troubleshooting¶

• Resetting the MBB at D0 for WIB clock problems

• Running PTB in Standalone Mode

• Issues with TPC

• Issues with CRT

Other useful links¶

• Running CAEN DT5702 readout of CRT

• Standalone Bern Readout Instructions

• Running at CERN

• How to set up a Linux system to talk to 'scopes and pulsers

• zlib ups instructions: https://gist.github.com/dingp/add791112d2954766a5d365ec48331b3

• SBND TPC DAQ

Changing and adding artdaq configurations¶

1.WebConfigEditor https://cdcvs.fnal.gov/redmine/projects/artdaq-utilities/wiki/Artdaq-config-editor
2.conftool.py https://cdcvs.fnal.gov/redmine/projects/artdaq-utilities/wiki/Artdaq-config-conftool

Notes¶

RunConfig DB requirements notes