ToF system » History » Version 9

« Previous - Version 9/70 (diff) - Next » - Current version
Will Flanagan, 05/30/2019 02:17 PM

ToF system

Voltage settings

Detector     | Voltage
DS1          | 899 V 
DS2          | 896 V 
DS3          | 868 V 
DS4          | 916 V 
US5          | 886 V
US6          | 878 V
US7          | 936 V
US8          | 892 V

The nominal ToF PMT voltages are -900V and SiPM voltages are -29V (bias) and +5V (opamp).

The PMT voltages are supplies by a power supply at -1000V with a cow subtracting (adding) 100V for each channel to arrive at -900V. This allows for tuning down the road.

The SiPM voltages are supplied by a (EHS 8001n_106) LV power supply sitting in a VME crate.

The PMT voltages and SiPM board supplies are turned on by hand. The SiPM bias voltage is configured through the VNC crate.

ssh -Y

To keep an eye on voltages and currents, open a VNC session:

ssh -L 5943:localhost:5953 -N -f -l novacr03

If the VNC session on is not already displaying the SiPM voltages, point a browser to:

US (PMT) - 0.79" x 5.91" x 5.91", then UVT PMMA light guides tapered to 0.79" x 0.79" with light detector glued
DS (PMT) - 0.24" x 5.91" x 5.91", cut at corners with light detector glued
DS (SiPM) - 0.52" x 5.91" x 5.91", cut at corners with light detector glued
EJ-232Q-0.5% Fast Timing Plastic Scintillator

In progress: ToF_system_samplecode