NOvA » NOvA Test Beam

h1. Front-end information

h2. V1742/V1495 channel mapping (Last Modified: June 27 2019)

<pre>

Input                            | Digitizer Channel | Trigger Channel 

---------------------------------+-------------------+------------------

Cherenkov                        | 0                 | NC

Scintillator Paddle 1 (Mock WC1) | NC                | 4

Scintillator Paddle 2 (Mock WC2) | NC                | 5

Scintillator Paddle 3 (Mock WC3) | NC                | 6

Scintillator Paddle 4 (Mock WC4) | NC                | 7

ToF DS 5 (SiPM)                  | 4                 | NC

ToF DS 6 (SiPM)                  | 5                 | NC

ToF DS 7 (SiPM)                  | 6                 | NC

ToF DS 8 (SiPM)                  | 7                 | NC

ToF US 1 (PMT)                   | 8                 | NC 

ToF US 2 (PMT)                   | 9                 | NC

ToF US 3 (PMT)                   | 10                | NC

ToF US 4 (PMT)                   | 11                | NC

ToF DS 1 (PMT)                   | 12                | NC

ToF DS 2 (PMT)                   | 13                | NC

ToF DS 3 (PMT)                   | 14                | NC

ToF DS 4 (PMT)                   | 15                | NC

WC 1 Logic                       | NC                | 0

WC 2 Logic                       | NC                | 1

WC 3 Logic                       | NC                | 2

WC 4 Logic                       | NC                | 3

TOFPrompt Logic                  | NC                | 14

TOFSlow Logic                    | NC                | 15

</pre>

h2. VME crate

As user novadaq, the directory

<pre>

/home/nfs/novadaq/

</pre>

on novabeamlinedaq00 contains some useful utilities to communicate with the hardware.  All CAEN provided software.

Run CAEN upgrader GUI:

<pre>

./CAENUpgrader-1.6.3/CAENUpgraderGUI/CAENUpgraderGUI

</pre>

Run CAEN V1742 digitizer (outside of DAQ):

<pre>

wavedump-3.8.2/bin/wavedump /etc/wavedump/WaveDumpConfig_X742.txt

</pre>

Run CAEN VME module:

<pre>

./CAENVMELib-2.50/sample/CAENVMEDemo V2718 <base address, in hex (beginning 0x)> <link>

</pre>

With this utilities, one can set the base address (option 2), set a register (option 1) and read etc.

CAEN base addresses:

Board     Address

1742       3211

2495      3210

1495       0100

h2. V1742 Digitizer

h3. Post-Trigger

The V1742 has a register named @POST_TRIGGER@. This value is a percentage of the readout that is to be after the trigger. There is an implicit latency of around 40 ns, so in reality, the Post-Trigger percentage sets the percentage of the readout that will be *after* 40 ns past the trigger.

For an unknown reason, only certain values of @POST_TRIGGER@ are accepted and must be found by trial and error.

h3. Known working values

* 0

* 20

* 45

h2. MWPC Controller(s)

Beamline:

* Hardware address: 00.80.55.00.00.68

* IP address: 131.225.176.70

* Name: ftbfwc03

* CD system reference number: S22041

* CD equipment ID number: 557912

Target:

* Hardware address: 00.80.55.EE.00.08

* IP address: 131.225.176.164

* Name: ftbfwc07

* CD system reference number: S22056

Log in (e.g.):

<pre>

telnet ftbfwc03 <port>

</pre>

Ports (according to "here":https://cdcvs.fnal.gov/redmine/projects/ftbfwirechamberdaq/wiki/Wire_Chamber_DAQ_Developer)

* 5000 - daq apps

* 5001 - emergency access

* 5002 - telnet sessions

[[MWPC Configuration and Registers]]