Project

General

Profile

Previous Page Main Page What to do while on shift DAQ Trouble Shooting Guide

Turn the HV on/off

  • To set the high-voltage on, execute:
    hv-on-instrumented 425
  • To set the high-voltage off, execute:
    hv-off-instrumented
  • To verify the voltages, look at the HV tab on the DCS GUI running on the dsc machine.
  • To do this for individual dcms, the commands are hv-on-1-1 425, hv-off-1-1 etc. for each dcm position name.
  • In the future it is possible that the voltage to set the hv to will not be 425 V. However, for now, everything should be set to 425 V.
Previous Page Main Page What to do while on shift DAQ Trouble Shooting Guide