How to start TDUControl¶
Start a terminal (usually on nova-daq-01), and log in
Setup the Environment¶
Start the App¶
>TDUControl -r -p
The client should automatically connect to the Near Detector Master TDU and be set into listen mode.
If the auto connect fails: Connect to the TDU Master¶
- select "Near Detector Master" in the Application
- click "Connect"
If auto syncs fail: Reset the TDUControl into listen mode¶
- From the Config dropdown menu select "Reset Runcontrol Listen"
- This is need for example after a restart of the DDS system.
- If connecting to the Near Detector Master (Primary) does not work, try connecting to (Secondary)