- Table of contents
- NOvA DDT (Data Driven Trigger) Wiki
- Expert Instructions
- Software Development
NOvA DDT (Data Driven Trigger) Wiki¶
This page contains information on the trigger systems for the NOvA experiment. These pages document how to develop, test, characterize and deploy triggers for the detectors. If you have questions, please contact Andrew Norman (firstname.lastname@example.org) or Martin Frank (email@example.com).
Operations and Shifter Instructions¶
Go here if you have operational problems with triggers running on the detectors.
These pages contain general information regarding how to interact with the trigger system.
Trigger Rate, Bandwidth and Allocations Tables¶
These pages contain the up to date mappings of the triggers that are run on the NOvA detectors along with allocated bandwidths, prescales and other values affecting the allocation of DAQ/Trigger resources.
Current Tables (21NOV2014):
- Testing a new Configuration FHICL
- Updating the Configuration FHICL
- Updating the UPS Product
- Building DDT product for novasoft
- Rogue DDT Processes
Instructions for getting started and working with the trigger software frameworks.
These pages contain information regarding specific triggers in the Nova system.Physics
- Muon Neutrino Trigger
- Upward going Muon Trigger
- Monopole Triggers (Slow and Fast)
- Total Energy Triggers
All data collected by the Nova DAQ is split into different "streams" corresponding to the type of information that is being collected (physics processes, calibration, etc...)
Zero Bias samples are collected as part of the normal readout. Information on how to use zero bias data:
Locating Zero Bias Data
Data taken with NOvA are cataloged via the SAM system.
Some small samples of (legacy) data can be found at