Project

General

Profile

Shifter Instructions » History » Version 8

Martin Frank, 11/14/2013 09:47 AM

1 1 Martin Frank
h1. NDOS Shifter Instructions
2 1 Martin Frank
3 1 Martin Frank
h2. Starting the Trigger
4 1 Martin Frank
5 5 Martin Frank
*Here is how you start the trigger processes on the buffer nodes:*
6 1 Martin Frank
7 5 Martin Frank
*1. Click on the "DDT Manager" icon on the same display as NDOS Run Control:*
8 1 Martin Frank
9 3 Martin Frank
!ddt_icon.png!
10 1 Martin Frank
11 5 Martin Frank
*2. The following manager should pop up (you might have to scroll around the display to find it):*
12 4 Martin Frank
13 1 Martin Frank
!ddt_all_stopped.png!
14 1 Martin Frank
15 5 Martin Frank
*3. Click the "Start Group" button to start all of the processes and when they are all running it should look like this:*
16 1 Martin Frank
17 5 Martin Frank
!ddt_all_running.png!
18 1 Martin Frank
19 1 Martin Frank
h2. Stopping the Trigger
20 1 Martin Frank
21 6 Martin Frank
*1. Click the "Stop Group" button and wait until everything is pink (not running).*
22 1 Martin Frank
23 6 Martin Frank
*2. Click on File -> Exit to exit the manager:*
24 1 Martin Frank
25 6 Martin Frank
!ddt_exit.png!
26 2 Martin Frank
27 2 Martin Frank
h2. Recovering a Trigger
28 2 Martin Frank
29 7 Martin Frank
*Occasionally a trigger process might die, so you can recover it as follows:*
30 1 Martin Frank
31 7 Martin Frank
*1. Send an email to novaddt@fnal.gov telling us which trigger process died.  For example, trigger process 002 died here:*
32 3 Martin Frank
33 7 Martin Frank
!ddt_002_stopped.png!
34 2 Martin Frank
35 8 Martin Frank
*2. Right-click on the dead process and click "Start Process":*
36 2 Martin Frank
37 8 Martin Frank
!ddt_002_restart.png!
38 1 Martin Frank
39 8 Martin Frank
*3. Everything should be green again.*
40 8 Martin Frank
41 8 Martin Frank
*4. If the process dies more than twice in an hour, do not restart it again and notify us via email.*