Shifter Instructions » History » Version 3

« Previous - Version 3/30 (diff) - Next » - Current version
Martin Frank, 11/14/2013 09:29 AM

NDOS Shifter Instructions

Starting the Trigger

Here is how you start the trigger processes on the buffer nodes:

1. Click on the "DDT Manager" icon on the same display as NDOS Run Control:

2. Click the "Start Group" button to start all of the processes:

3. When everything is running, all of the buttons should be green:

Stopping the Trigger

1. Click the "Stop Group" button:

2. After everything is stopped, all of the buttons should be pink:

3. You can now safely exit the DDT Manager by clicking File -> Exit.

Recovering a Trigger

Occasionally a trigger process might die, so you can recover it as follows:

1. Send an email to telling us which trigger process died. For example, trigger process 002 died here:

2. Right-click on the dead process and click "Start Process":

3. Everything should be green again.

4. If the process dies more than twice in an hour, do not restart it again and notify us via email.