Project

General

Profile

Data Files from NDOS » History » Version 3

Martin Frank, 10/15/2012 09:42 AM

1 1 Martin Frank
h1. Data Files from NDOS
2 1 Martin Frank
3 1 Martin Frank
This wiki entry describes how to collect data from NDOS and store it as a data file that can be used with our DDT framework.
4 2 Martin Frank
5 3 Martin Frank
First, you need to make sure that data is being collected.  Check the MicroSlice rate of the DCMs on "Ganglia":https://novadaq-ctrl-datamon.fnal.gov/ganglia/?r=2hr&cs=&ce=&m=MicroSlice%2520Rate_P0&s=by+name&P=0&c=DCM&h=&host_regex=&max_graphs=0&sh=1&z=small&hc=4&q= , it should be 20 kHz.
6 1 Martin Frank
7 3 Martin Frank
Once that is verified you can log into one of the NDOS buffer nodes:
8 3 Martin Frank
9 2 Martin Frank
<pre>
10 2 Martin Frank
ssh novadaq@novadaq-ctrl-farm-01.fnal.gov
11 2 Martin Frank
</pre>
12 2 Martin Frank
13 2 Martin Frank
NDOS has 16 buffer nodes (01 - 16).  Note that the @novaddt@ user does not have permissions on the buffer nodes.
14 2 Martin Frank
15 2 Martin Frank
Now you just need to set up the environment and run the job:
16 2 Martin Frank
17 1 Martin Frank
<pre>
18 2 Martin Frank
setup_novaddt
19 3 Martin Frank
ddt-filter -c ddt-writeFile.fcl
20 2 Martin Frank
</pre>
21 2 Martin Frank
22 3 Martin Frank
This will run on the data stream and dump the data into a file called @ddt.root@.