Project

General

Profile

19-Oct-2011 novatest01 log

19-Oct-2011, KAB: Here are the steps that I used to build a copy of Qwt 5.2.2 with Qt 4.7.4.

  • downloaded qwt-5.2.2.tar.bz2 from http://sourceforge.net/projects/qwt/files/qwt/5.2.2
  • started off using my account...
  • 'cd $HOME'
  • 'tar -xvf <downloadDir>/qwt-5.2.2.tar.bz2'
  • 'cd qwt-5.2.2'
  • edited qwtconfig.pri to make the following changes:
    • set the UNIX INSTALLBASE to /nova/ups/qwt/v5_2_2/Linux64bit+2.6-2.5+QT_4_7_4
    • commented out "CONFIG += QwtDesigner"
  • 'setup qt v4_7_4 -q NOvA'
  • 'qmake'
  • 'make'
  • switched to the products account
  • 'cd /nova/ups/qwt/v5_2_2'
  • 'mkdir Linux64bit+2.6-2.5+QT_4_7_4'
  • 'cd /home/biery/qwt-5.2.2'
  • 'make install'
  • 'cd /nova/ups/qwt/v5_2_2/Linux64bit+2.6-2.5+QT_4_7_4'
  • 'mkdir ups'
  • 'cp ../Linux64bit+2.6-2.5/ups/qwt.table ups/.'
  • edited the new table file to have the correct qualifier (QT_4_7_4)
  • 'ups declare -f Linux64bit+2.6-2.5 -r /nova/ups/qwt/v5_2_2/Linux64bit+2.6-2.5+QT_4_7_4 -m qwt.table qwt v5_2_2 -q QT_4_7_4'