Project

General

Profile

StartingStopping the Laser Scanner FTS

The FTS instances for the Laser scanner is run under the "novaraw" account (this is the nova raw data account which is used for handling all "raw" data). You will need to login to this account to start or stop the FTS software.

Currently the FTS for the laser scanner systems is hosted off of our third raid array (novadaq-far-datadisk-03.fnal.gov) so to login:

ssh novaraw@novadaq-far-datadisk-03.fnal.gov

From here you can change the state of the FTS system.

If the FTS for the Laser Scanner needs to be started/stopped/restarted do the following:

source setup_sam_prd.sh
setup FileTransferService
start_fts /home/novaraw/fts/fts_rundir/ fts_laser.ini

Or to stop it:

source setup_sam_prd.sh
setup FileTransferService
stop_fts /home/novaraw/fts/fts_rundir/

To check the status from the web interface go to:

http://novadaq-far-datadisk-03.fnal.gov:8888/fts/status