Project

General

Profile

Geometry files used in NOvA

Name Mass (ton) Active detector dimensions (x,y,z in cm) Cell shape Air/Vacuum Wall thickness (mm) #blocks #planes/block Description used in release Reference
ndos-2x3-6block-xtru-air.gdml 225.35 262.6 x 393.6 x 1425.5 Extrusion Air 3.3 6 31 NDOS geometry with muon catcher - DocDB-540
ndos-2x3-6block-xtru-vacuum.gdml 225.35 262.6 x 393.6 x 1425.5 Extrusion Vacuum 3.3 6 31 NDOS geometry with muon catcher S12.02.14 DocDB-540
ndos-2x3-6block-box-air.gdml - 262.6 x 393.6 x 1425.5 Box Air 3.3 6 31 NDOS geometry with muon catcher - DocDB-540
ndos-2x3-6block-box-vacuum.gdml - 262.6 x 393.6 x 1425.5 Box Vacuum 3.3 6 31 NDOS geometry with muon catcher - DocDB-540
ndos-2x3-6block-trap-air.gdml - 262.6 x 393.6 x 1425.5 Trapezoid Air 3.3 6 31 NDOS geometry with muon catcher - DocDB-540
ndos-2x3-6block-trap-vacuum.gdml - 262.6 x 393.6 x 1425.5 Trapezoid Vacuum 3.3 6 31 NDOS geometry with muon catcher - DocDB-540
ndos-2x3-6block-xtru_nocutout-air.gdml - 262.6 x 393.6 x 1425.5 Extrusion Air 3.3 6 31 NDOS geometry with muon catcher and without cutout - DocDB-540
ndos-2x3-6block_nomc-xtru-vacuum.gdml - 262.6 x 393.6 x 1239.2 Extrusion Vacuum 3.3 4 31 NDOS geometry with muon catcher S12.02.14 DocDB-540
ndos-2x3-4block_nomc-xtru-vacuum.gdml - 262.6 x 393.6 x 825.8 Extrusion Vacuum 3.3 6 31 NDOS geometry without muon catcher S12.02.14 DocDB-540
neardet-2x3-6block-xtru-vacuum.gdml - 262.1 x 393.3 x 1465.3 Extrusion Vacuum 4.8 6 32 Near Detector geometry muon catcher S12.02.14 DocDB-3974
neardet-3x3-6block-xtru-vacuum.gdml ~3401 393.3 x 393.3 x 1465.3 Extrusion Vacuum 4.8 6 32 Near Detector geometry muon catcher S12.02.14 DocDB-3974,5596
neardet-3x2-6block-box-vacuum.gdml - 262.1 x 393.3 x 1465.3 Box Vacuum 4.8 6 32 Near Detector geometry muon catcher - DocDB-3974
neardet-3x3-6block-box-vacuum.gdml - 393.3 x 393.3 x 1465.3 Box Vacuum 4.8 6 32 Near Detector geometry muon catcher - DocDB-3974
neardet_scibar-box-air.gdml - 290.0 x 290.0 x 166.4 Box Air - - - SciNOvA detector extrusion geometry, 64 layers, each layer has x and y planes - DocDB-3974
fardet-12x12-30block-xtru-vacuum.gdml 14625 1549.4 x 1549.4 x 6423.0 Extrusion Vacuum 4.8 30 32 Far Detector geometry, 2.32 cm space between two consecutive blocks S12.02.14 DocDB-2066,3974,5813,5935,3190
testbeam-1x1-2block-xtru-vacuum.gdml - 131.1 x 131.1 x 426.8 Extrusion Vacuum 4.8 2 32 Test beam geometry - DocDB-3974
testbeam-1x1-3block-xtru-vacuum.gdml - 131.1 x 131.1 x 641.4 Extrusion Vacuum 4.8 3 32 Test beam geometry - DocDB-3974
testbeam-2x2-2block-xtru-vacuum.gdml - 262.1 x 262.1 x 426.8 Extrusion Vacuum 4.8 2 32 Test beam geometry - DocDB-3974
testbeam-2x2-3block-xtru-vacuum.gdml - 262.1 x 262.1 x 641.4 Extrusion Vacuum 4.8 3 32 Test beam geometry - DocDB-3974
The geometry files have been renamed.
old name new name
fardet.gdml fardet-12x12-30block-xtru-vacuum.gdml
ndos-2db.gdml ndos-2x3-4block_nomc-xtru-vacuum.gdml
ndos-air.gdml ndos-2x3-6block-xtru-air.gdml
ndos-box.gdml ndos-2x3-6block-box-air.gdml
ndos-box-vacuum.gdml ndos-2x3-6block-box-vacuum.gdml
ndos.gdml ndos-2x3-6block-xtru-vacuum.gdml
ndos-nocutout.gdml ndos-air-2x3-6block-xtru_nocutout.gdml
ndos-nosteel.gdml ndos-2x3-6block_nomc-xtru-vacuum.gdml
ndos-trap.gdml ndos-2x3-6block-trap-air.gdml
ndos-trap-vacuum.gdml ndos-2x3-6block-trap-vacuum.gdml
neardet-3x3.gdml neardet-3x3-6block-xtru-vacuum.gdml
neardet-box-3x2.gdml neardet-3x2-6block-box-vacuum.gdml
neardet-box-3x3.gdml neardet-3x3-6block-box-vacuum.gdml
neardet.gdml neardet-2x3-6block-xtru-vacuum.gdml
neardet-scibar.gdml neardet_scibar-box-air.gdml
testbeam-1x1-2block.gdml testbeam-1x1-2block-xtru-vacuum.gdml
testbeam-1x1-3block.gdml testbeam-1x1-3block-xtru-vacuum.gdml
testbeam-2x2-2block.gdml testbeam-2x2-2block-xtru-vacuum.gdml
testbeam-2x2-3block.gdml testbeam-2x2-3block-xtru-vacuum.gdml

Note:
[1]. As of June 5th, 2012. I do not see an official number on the Near Detector mass (3X3), I will update this table once I have.
cutout: Please refer to "vVExtruNotchCutout" in the attachment.