Project

General

Profile

Official Datasets » History » Version 15

« Previous - Version 15/81 (diff) - Next » - Current version
Dominick Rocco, 07/16/2014 05:22 PM


Official Datasets

Monte Carlo

GENIE MC ARTDAQ

FD

prodartdaq_S14-02-05_fdcry (10168)

ND

prodartdaq_S14-05-12_ndgenie (20087)

GENIE MC Reconstruction

Official production datasets containing all reconstructed files

FD

ALL FD GENIE RECO:
prodreco_S14-03-25_FDGENIE (2807 files)

FD RHC NONSWAP:
prodreco_S14-03-25_FDGENIE_rhc_nonswap (703)

FD FHC NONSWAP:
prodreco_S14-03-25_FDGENIE_fhc_nonswap (703)

FD RHC SWAP:
prodreco_S14-03-25_FDGENIE_rhc_swap (698)

FD FHS SWAP:
prodreco_S14-03-25_FDGENIE_fhc_swap (703)

ND

ND GENIE (rock+detector) OVERLAY RECO

ND FHC
prodreco_S14-07-03_ndgenie (20057 and increasing)

CRY MC ARTDAQ

ND CRY COSMICS:
prodartdaq_S14-05-12_ndcry

FD CRY COSMICS:
prodartdaq_S14-02-05_fdcry

CRY MC Reconstruction

FD CRY COSMICS:
prodreco_S14-03-25_FDCRY (10069)

Calibration (pchitlists)

ND CRY COSMICS:
prodcalib_S14-05-12_ndcry_pclist
prodcalib_S14-05-12_ndcry_pcliststop

FD CRY COSMICS:
prodcalib_S14-03-05_FDCry_pclist
prodcalib_S14-03-05_FDCry_pcliststop

DATA

FD

Datasets

The datasets for these files can be found in SAM. For PID, there is also a small sample living on Bluearc. For CAFs, the entire sample lives on Bluearc. All of the official datasets specify the run range for the the 4db and 7db configurations based on the Stable Partition Milestones wiki page. The datasets also require subruns (files) to pass the data quality cuts.

The SAM datasets and Bluearc locations are as follows:

PID - 4db:
prod_pid_S14-05-12_fardet_cosmics_p1_4db_good
/nova/prod/data/S14-05-12/fd/pid/ (Run numbers less than 14702)

PID - 7db
prod_pid_S14-05-12_fardet_cosmics_p1_7db_good
/nova/prod/data/S14-05-12/fd/pid/ (Run numbers greater than or equal to 14702)

CAF - 4db:
prod_caf_S14-07-11_fardet_cosmics_p1_4db_good
/nova/prod/data/S14-07-11/cosmic/fd/caf/ (Run numbers less than 14702)

CAF - 7db
prod_caf_S14-07-11_fardet_cosmics_p1_7db_good
/nova/prod/data/S14-07-11/cosmic/fd/caf/ (Run numbers greater than or equal to 14702)

The underlying reco and pidpart(sans LEM) datasets exist only in SAM:
pidpart - 4db:
prod_pidpart_S14-05-12_fardet_cosmics_p1_4db_good

pidpart - 7db:
prod_pidpart_S14-05-08_fardet_cosmics_p1_7db_good

reco - 4db:
prod_reco_S14-05-08_fardet_cosmics_p1_4db_good

reco - 7db:
prod_reco_S14-05-08_fardet_cosmics_p1_7db_good

Comments on Livetime

In terms of livetime, the 4db sample is much larger than the 7db sample. The 4db PID sample is roughly ten times larger than that used for Neutrino 2014. The four diblock CAF sample is currently twice the size of the Neutrino sample, although it's growing. The CAFMaking process has been tedious due to CAFMaker crashes*, and the sample will never be as large as the PID sample as a result. The 7db sample, in terms of livetime, is roughly the same size as the Neutrino 2014 sample. However, that detector configuration has 75 percent more detector mass. The same caveat applies to the size of the CAF sample.

Processing history

The processing history for these files is as follows:
Reco: S14-05-08 - Notably, this tag resolves the KalmanTrack association bug
PID: S14-05-12 - Loose nue preselection
CAF: S14-07-11 - Uses LiveGeometry, but gets the CAF metadata right.