Project

General

Profile

REMOTE » History » Version 13

Stefano Tognini, 06/14/2013 02:38 PM

1 12 Stefano Tognini
h1. MINOS+ Remote Operation Centers (ROC's)
2 1 Arthur Kreymer
3 9 Stefano Tognini
Remote Operation Centers provides the flexibility for the collaborators to take shifts remotely. To be a certified ROC one must fulfill the prerequisites documented in the DocDB-xxxx-Vn (will be updated soon). This documentations provides a full explanation of the hardware and software requirements, a step-by-step installation procedure and how the certification process works.
4 1 Arthur Kreymer
5 1 Arthur Kreymer
6 9 Stefano Tognini
h2. Introduction
7 1 Arthur Kreymer
8 9 Stefano Tognini
This wiki is intended to help the remote shifters to complete their daily tasks during shifts.
9 1 Arthur Kreymer
10 3 Stefano Tognini
11 9 Stefano Tognini
h2. Communication protocol during shift transitions
12 1 Arthur Kreymer
13 11 Stefano Tognini
Since remote shifts are different from shift performed at the Control Room, the hand-on and hand-off must be performed in a different way. This is a quick step by step guide of the protocol.
14 11 Stefano Tognini
A more detailed explanation about these steps can be found in DocDB 9842-v1.
15 1 Arthur Kreymer
16 1 Arthur Kreymer
17 9 Stefano Tognini
h3. Hand-on procedure
18 8 Arthur Kreymer
19 9 Stefano Tognini
* The oncoming remote shifter calls the current local (or remote) shifter before the end of the current shift to discuss the status of the experiment. It is strongly recommended that the oncoming shifter also checks the Logbook and the Memopad. (Ignore this step if there was no previous shift, but checking the Logbook and MemoPad before the start of the shift is strongly recommended and could avoid some problems.)
20 1 Arthur Kreymer
21 9 Stefano Tognini
* The oncoming remote shifter calls the MCR to inform that a remote shift is starting.
22 1 Arthur Kreymer
23 9 Stefano Tognini
* The oncoming remote shifter must add a note in the Logbook with the shifters name and the ROC informations (location and phone number).
24 1 Arthur Kreymer
25 9 Stefano Tognini
* The oncoming remote shifter must ensure that the remote shift contact information is prominently displayed in the MINOS+ Control Room.
26 1 Arthur Kreymer
27 9 Stefano Tognini
h3. Hand-off procedure
28 1 Arthur Kreymer
29 9 Stefano Tognini
* Oncoming local (or remote) shifter will call the current shifter (local or remote) before the end of the shift.
30 1 Arthur Kreymer
31 9 Stefano Tognini
* The current shifter must state in the logbook that the current remote shift has ended.
32 1 Arthur Kreymer
33 9 Stefano Tognini
* The current remote shift announce display must be removed from the MINOS+ Control Room display.
34 1 Arthur Kreymer
35 9 Stefano Tognini
36 9 Stefano Tognini
37 9 Stefano Tognini
h2. List of certified ROC's
38 9 Stefano Tognini
39 13 Stefano Tognini
| CERTIFIED ON  | STATION       | INSTITUTION'S NAME          | PHONE                                  | CURRENT RESPONSIBLE                     |  
40 9 Stefano Tognini
| 2013-05-27   | ROC @ Goias |  Federal University of Goias | +55 62 3521 1122 ext. 217  | Stefano Tognini (stognini@fnal.gov) |