REMOTE » History » Version 12
Stefano Tognini, 06/14/2013 02:37 PM
1 | 12 | Stefano Tognini | h1. MINOS+ Remote Operation Centers (ROC's) |
---|---|---|---|
2 | 1 | Arthur Kreymer | |
3 | 9 | Stefano Tognini | Remote Operation Centers provides the flexibility for the collaborators to take shifts remotely. To be a certified ROC one must fulfill the prerequisites documented in the DocDB-xxxx-Vn (will be updated soon). This documentations provides a full explanation of the hardware and software requirements, a step-by-step installation procedure and how the certification process works. |
4 | 1 | Arthur Kreymer | |
5 | 1 | Arthur Kreymer | |
6 | 9 | Stefano Tognini | h2. Introduction |
7 | 1 | Arthur Kreymer | |
8 | 9 | Stefano Tognini | This wiki is intended to help the remote shifters to complete their daily tasks during shifts. |
9 | 1 | Arthur Kreymer | |
10 | 3 | Stefano Tognini | |
11 | 9 | Stefano Tognini | h2. Communication protocol during shift transitions |
12 | 1 | Arthur Kreymer | |
13 | 11 | Stefano Tognini | Since remote shifts are different from shift performed at the Control Room, the hand-on and hand-off must be performed in a different way. This is a quick step by step guide of the protocol. |
14 | 11 | Stefano Tognini | A more detailed explanation about these steps can be found in DocDB 9842-v1. |
15 | 1 | Arthur Kreymer | |
16 | 1 | Arthur Kreymer | |
17 | 9 | Stefano Tognini | h3. Hand-on procedure |
18 | 8 | Arthur Kreymer | |
19 | 9 | Stefano Tognini | * The oncoming remote shifter calls the current local (or remote) shifter before the end of the current shift to discuss the status of the experiment. It is strongly recommended that the oncoming shifter also checks the Logbook and the Memopad. (Ignore this step if there was no previous shift, but checking the Logbook and MemoPad before the start of the shift is strongly recommended and could avoid some problems.) |
20 | 1 | Arthur Kreymer | |
21 | 9 | Stefano Tognini | * The oncoming remote shifter calls the MCR to inform that a remote shift is starting. |
22 | 1 | Arthur Kreymer | |
23 | 9 | Stefano Tognini | * The oncoming remote shifter must add a note in the Logbook with the shifters name and the ROC informations (location and phone number). |
24 | 1 | Arthur Kreymer | |
25 | 9 | Stefano Tognini | * The oncoming remote shifter must ensure that the remote shift contact information is prominently displayed in the MINOS+ Control Room. |
26 | 1 | Arthur Kreymer | |
27 | 9 | Stefano Tognini | h3. Hand-off procedure |
28 | 1 | Arthur Kreymer | |
29 | 9 | Stefano Tognini | * Oncoming local (or remote) shifter will call the current shifter (local or remote) before the end of the shift. |
30 | 1 | Arthur Kreymer | |
31 | 9 | Stefano Tognini | * The current shifter must state in the logbook that the current remote shift has ended. |
32 | 1 | Arthur Kreymer | |
33 | 9 | Stefano Tognini | * The current remote shift announce display must be removed from the MINOS+ Control Room display. |
34 | 1 | Arthur Kreymer | |
35 | 9 | Stefano Tognini | |
36 | 9 | Stefano Tognini | |
37 | 9 | Stefano Tognini | h2. List of certified ROC's |
38 | 9 | Stefano Tognini | |
39 | 10 | Stefano Tognini | | CERTIFIED | STATION | INSTITUTION'S NAME | PHONE | CURRENT RESPONSIBLE | |
40 | 9 | Stefano Tognini | | 2013-05-27 | ROC @ Goias | Federal University of Goias | +55 62 3521 1122 ext. 217 | Stefano Tognini (stognini@fnal.gov) | |