Heating and cooling¶
There are three heating and cooling systems in the Control Room.
- The Wilson Hall air system
- The stand-alone air conditioning system
- Radiators along the bottom of the walls
The Wilson Hall air system sends air in through the ceiling. This is controled by the thermostat to the right of the door. This should be your first port of call when trying to change the room temperature. This system runs from 7 am until 11 pm.
The stand-alone air conditioning system should be used to provide additional cooling when the Wilson Hall air system is not enough. It is programmed to switch on every night when the Wilson Hall system switches off.
The radiators can provide additional heat when needed. The valves to switch these on and off can be found at the ends of the two radiators, in the corner of the room behind the Minerνa desks.