Starting and using TDUControl » History » Version 9

« Previous - Version 9/21 (diff) - Next » - Current version
Thomas Dealtry, 01/30/2015 05:41 AM

Getting help

Email Tom Dealtry -


The following are instructions on how to communicate with the NOvA timing distrubution unit (TDU). The TDU distributes timing information throughout the system, handles synchronisation between boards, and includes automatic propagation delay calculation & compensation.

There are various ways to communicate:

  • Through lbnerc & daqinterface (coming soon)
  • Booting up an xmlrpc server & commuicating through this
  • Communicating with the TDU directly

Communication with the TDU

The following will get Python 2.7.8, and set the environment (the code lives in lbnerc, located at /data/lbnedaq/tdu/lbnerc/)
(Note when the feature/tdu branch is merged into the develop branch, the normal fireup instructions at will work)

source /data/lbnedaq/daqarea/lbne-artdaq-base/setupLBNEARTDAQ
cd /data/lbnedaq/tdu/
source fireup_tdu

$LBNERCROOT refers to the root path of your lbnerc install (it's not actually a variable that's set!)

Communication via xmlrpc server

The first step is to initialise the xmlrpc server (if it hasn't been already). The options -T and -P refer to the TDU host & port respectively (the master in this example). The optiosn -H and -r refer to the host & port the xmlrpc server is being created on.

tdu -T -P 10001 -H localhost -r 50008

Next, you can use call the xmlrpc server to communicate with the TDU.

python rc/tdu/testing_scripts/ -T localhost -p 50008

This will print out a list of commands and exit. To actually do something, add one (or more) switches
-s    calls do_time_sync()
-d calls do_delay_calc()
-P calls do_ping()
-g calls get_status()

If you want to do something else, then you can either add in a new option, or write a new script based on

Communication with TDU directly

python rc/tdu/testing_scripts/ -T -p 10001

By default this will do_ping(), and if successful do_time_sync().
A couple of switches allow you to do more:
-d    calls do_delay_calc()
-t calls debug_read_all_registers()

If you want to do something else, then you can either add in a new option, or write a new script based on

Running an emulator

If you don't have access to the hardware, you can run on a (very basic) emulator.

python $LBNERCROOT/rc/tdu/testing_scripts/ -T localhost -P 50007

List of commands (to be expanded)

All 'get', 'do', and 'read' commands return an error code with a common numbering scheme. 'get' commands also return additional information.

'get' commands

  • get_status()
    Returns [error_code, ready_to_do]. When ready_to_do is True, the control register can be modified (i.e. a 'do' command can be performed)

'do' commands

  • do_ping()
    ping the TDU
  • do_time_sync()
    Perform a time synchronisation (this calls get_status() internally)
  • do_delay_calc()
    Perform a propagation delay calculation (this calls get_status() internally)
  • do_send_sync_pulse()
    Send a sync pulse (this calls get_status() internally)
  • debug_do_write_control_reg(data_to_or)
    Write the control register to perform a none standard operation (this calls get_status() internally)

'read' commands

  • read_tdu_id()
    Read out the TDU version & ID numbers
  • read_tdu_status()
    Read out the TDU's current operating conditions (current, voltage, temperature, fan status, FPGA status)
  • read_gps_status()
    Read out the GPS status (faults, timeouts, sat count, etc. + current UTC time)
  • read_error_registers()
    Read out the error registers
  • read_control_reg()
    Read out the control register
  • debug_read_all_registers()
    Read out all the registers. Also comes with some hints on what the 'default' for normal operating conditions is.

Other commands

  • close_socket()
    Safely close the connection to the TDU
  • print_log
    Will be made private

Error codes

100-120    Wrong number of bytes received
-200/-201  Invalid register/data on receive
+200/+201  Invalid register/data on send
300        Cannot perform a 'do' command (get_status() returns ready_to_do=False after 10 attempts including 2 seconds of sleep)
301        Not ready to sync (TDU status error)
302        Not ready to sync (GPS status error)
400        Error found in error registers

List of TDU IP addresses (to be expanded)

  • Master:
  • Slave:

The port is ALWAYS 10001 (unless you're communciating with an emulator)

Using the NOvA GUI (TDUControl) - OLD & BROKEN

To start TDUControl, use the following steps:

  1. log into the lbnedaq account on lbne35t-gateway01
  2. source /data/lbnedaq/novadaq/setup/
  3. TDUControl -m
  4. enter the IP address of the Master TDU into the GUI (

Alternatively for steps 3 & 4, you can run TDUControl -m -t