Starting and using TDUControl » History » Version 4
Thomas Dealtry, 08/07/2014 10:51 AM
| 1 | 1 | Kurt Biery | h1. Starting and using TDUControl |
|---|---|---|---|
| 2 | 1 | Kurt Biery | |
| 3 | 2 | Kurt Biery | To start TDUControl, use the following steps: |
| 4 | 1 | Kurt Biery | # log into the <code>lbnedaq</code> account on <code>lbne35t-gateway01</code> |
| 5 | 3 | Kurt Biery | # <code>'source /data/lbnedaq/novadaq/setup/setup_novadaq_nt1.sh'</code> |
| 6 | 3 | Kurt Biery | # <code>'TDUControl -m'</code> |
| 7 | 2 | Kurt Biery | # enter the IP address of the Master TDU into the GUI (192.168.100.201) |
| 8 | 4 | Thomas Dealtry | Alternatively for steps 3 & 4, you can run <code>'TDUControl -m -t 192.168.100.201'</code> |