Project

General

Profile

Running DAQ Interface » History » Version 213

John Freeman, 01/09/2017 05:05 PM

1 1 John Freeman
2 211 John Freeman
John Freeman, Jan-9-2016:
3 1 John Freeman
4 211 John Freeman
This wiki page used to contain instructions on how to run the classic DAQInterface application for the 35ton experiment. Since 35ton, DAQInterface has been modified, and is now in general use across all experiments. Getting it installed and running takes only a couple of minutes; see https://cdcvs.fnal.gov/redmine/projects/artdaq-utilities/wiki/Artdaq-daqinterface for how to do this. Note that the instructions assume that you're working with the artdaq-demo DAQ software package rather than protoDUNE's lbne-artdaq DAQ software package; consequently the following modifications to the instructions on the new DAQInterface wiki apply
5 183 John Freeman
6 213 John Freeman
* After checking out artdaq-utilities-daqinterface, cd into it and run "git checkout protodune"; this will make it easier to modify 
7 213 John Freeman
* Make sure you've already got the 35ton configuration repo checked out - i.e., that you've run "git clone http://cdcvs.fnal.gov/cvs/projects/lbne-daq-config" in the directory where you wish to install lbne-daq-config
8 213 John Freeman
* Modify ./rc/control/config_functions_local.py so that the "config_dirname" variable at the top of the "get_config_info_base" function refers to the 35ton configuration repo
9 1 John Freeman
10 213 John Freeman
Besides this, following the instructions on the DAQInterface wiki will get you running with lbne-artdaq's ToySimulator.