Old LArSoftWiki » History » Version 58

Erica Snider, 12/08/2013 07:27 PM

1 54 Erica Snider
If you are looking for the legacy cvs-based LArSoft site that was previously hosted on this site, note that *all content has been moved to "LArSoft cvs (legacy site) ":*
2 54 Erica Snider
If you are looking for the legacy svn-based LArSoft site, "go here": 
3 1 Brian Rebel
4 1 Brian Rebel
5 54 Erica Snider
6 1 Brian Rebel
7 1 Brian Rebel
This is the beta LArSoft redmine project and the future home of the LArSoft redmine project.
8 29 Erica Snider
9 54 Erica Snider
h1. LArSoftWiki (beta)
10 1 Brian Rebel
11 54 Erica Snider
*This page is in beta and content is still under construction.*  Will go live when the migration to git/cmake is completed.
12 31 Erica Snider
13 1 Brian Rebel
14 54 Erica Snider
The LArSoft software is designed to work for all planned and running liquid argon experiments at Fermilab. It is written in C++ and built on the "ROOT": data analysis software, and the "art": analysis framework supported by the Fermilab Scientific Computing Division for intensity frontier experiments.
15 1 Brian Rebel
16 1 Brian Rebel
To join the LArSoft mailing list, please follow these "instructions": using the list name LARSOFT.
17 1 Brian Rebel
18 1 Brian Rebel
19 54 Erica Snider
h1. Preliminaries
20 35 Erica Snider
21 54 Erica Snider
* Fermilab computing accounts:  see the instructions on the [[larsoftsvn:Fermilab Computing Access]] page if you need an account.
22 54 Erica Snider
* See [[larsoftsvn:Load Balanced Access to General Purpose VMs]] for information on accessing experiment VMs at Fermilab (e.g., lbnegpvm0X, uboonegpvm0X, etc., collectively known as GPCF.).
23 54 Erica Snider
* See the [[LArSoftWiki#documentation|documentation]] section for information on working with/developing LArSoft code, and using git, git flow, mrb and other tools you will need.
24 54 Erica Snider
* The procedures and tools for building and developing software with this system are _completely different_ from those of the previous system based on svn repositories and the SoftRelTools build system. See the [[LArSoftWiki#documentation|documentation]] section for details.
25 1 Brian Rebel
26 35 Erica Snider
h2. Where to find the software
27 1 Brian Rebel
28 54 Erica Snider
In a standard LArSoft installation, the software is accessed via a set of re-locatable ups products, each of which corresponds to the code within a git repository. Each product and the associated repository contain LArSoft software components (i.e., SoftRelTool "packages") that are within the same layer of functionality. The products and repository read-write urls are the following (read-only access is available via<repo_name>):
29 35 Erica Snider
30 35 Erica Snider
31 35 Erica Snider
32 35 Erica Snider
name* | *repository url (all in Redmine)* | lxr link 
33 35 Erica Snider
                                            (not yet avail) | Redmine browser |
34 49 Erica Snider
|larcore| ssh:// | -- | "redmine": |
35 49 Erica Snider
|lardata| ssh:// | -- | "redmine": |
36 49 Erica Snider
|larevt | ssh://  | -- | "redmine": |
37 49 Erica Snider
|larsim | ssh://  | -- | "redmine": |
38 1 Brian Rebel
|larreco| ssh:// | -- | "redmine": |
39 49 Erica Snider
|larana | ssh://  | -- | "redmine": |
40 49 Erica Snider
|lareventdisplay| ssh:// | -- | "redmine": |
41 1 Brian Rebel
|larexamples|     ssh://     | -- | "redmine": |
42 49 Erica Snider
|larpandora| ssh:// | -- | "redmine: |
43 49 Erica Snider
|larsoft | ssh:// 
44 49 Erica Snider
           (A product used to set up the others with a single command. Contains the "setup" package.) | -- | 
45 49 Erica Snider
           "redmine": |
46 1 Brian Rebel
47 36 Erica Snider
(The SoftRelTools-based packages in each product/repository can be found "here": along with the approximate order of dependency.)
48 1 Brian Rebel
49 55 Erica Snider
Although you can use @git clone <repository url>@ to download a copy of each repository to your local area, additional steps are needed to use, build or develop the software. See the [[LArSoftWiki#documentation|documentation]] section below for details. 
50 35 Erica Snider
51 50 Erica Snider
h3. Re-factoring of experiment-specific software
52 50 Erica Snider
53 55 Erica Snider
Most experiment-specific code, fcl and gdml files have been removed from the @larcore@, @lardata@, @larevt@ and @larsim@ repositories and moved into beta versions of experiment-specific git repositories. (One exception to this statement is that the @DetId_t@ enum type, which effectively maps detector name strings to integers, remains in core LArSoft, pending migration to a new, string-based mechanism for storing and using this information. Other exceptions include fcl files that were not identified during the initial migration.) The beta versions of experiment-specific repositories are the following:
54 50 Erica Snider
55 50 Erica Snider
56 50 Erica Snider
57 50 Erica Snider
name* | *repository url (all in Redmine)* | lxr link 
58 50 Erica Snider
                                            (not yet avail) | Redmine browser |
59 50 Erica Snider
|lbnecode| ssh:// | -- | "redmine": |
60 50 Erica Snider
|uboonecode| ssh:// | -- | "redmine": |
61 50 Erica Snider
62 50 Erica Snider
63 50 Erica Snider
64 35 Erica Snider
65 1 Brian Rebel
66 45 Erica Snider
h1. Release notes
67 1 Brian Rebel
68 1 Brian Rebel
| *Release* | *Date* | *Purpose* | *Changes / notes* | *Full release notes* |
69 42 Erica Snider
| v1.00.00| Jan 2014 | First production 
70 42 Erica Snider
                       release | Replica of final svn-based release. Future LArSoft development 
71 42 Erica Snider
                                 proceeds from this release. | xxx |
72 55 Erica Snider
| v0.0x.yy| 12/10/2013| "beta" public release | Beta suitable for general user testing | N/A |
73 52 Erica Snider
| v0.01.01| 12/02/2013| "beta" limited release | Beta suitable for expert testing | N/A |
74 35 Erica Snider
| v0.00.09| 11/25/2013| "beta" pre-release | Second full release under new system. First full re-factoring
75 35 Erica Snider
                                       of experiment-specific and core LArSoft code in the larcore,
76 35 Erica Snider
                                       lardata, larevt, and larsim products. Preparation for expert
77 35 Erica Snider
                                       user testing of beta release.| N/A|
78 42 Erica Snider
| v0.00.04| 9/15/2013| "alpha" release | First release of git/cmake/ups-based LArSoft products
79 42 Erica Snider
                                       Used for mrb, configuration and re-factoring
80 42 Erica Snider
                                       development and testing | N/A |
81 33 Erica Snider
82 1 Brian Rebel
h1. Documentation
83 32 Erica Snider
84 48 Erica Snider
* [[ LArSoft ]]
85 1 Brian Rebel
86 58 Erica Snider
* [[ Quick-start guide to using and develop LArSoft code ]]
87 57 Erica Snider
* [[Quick-start guide to using and develop LArSoft code]]
88 1 Brian Rebel
89 1 Brian Rebel
* [[ Detailed documentation on using and developing LArSoft code ]]
90 52 Erica Snider
91 53 Erica Snider
* *[[ Special instructions for beta testers ]]*
92 1 Brian Rebel
93 43 Erica Snider
94 44 Erica Snider
h2. Overview of the user and developer environment
95 43 Erica Snider
96 51 Erica Snider
LArSoft releases are distributed via "re-locatable" ups products. People interested in using the core LArSoft software, but who have no need to modify or develop that software can in principle simply perform the appropriate ups @setup <product> <version> -q <qualifier>@ commands, then build their code against those products by reference to the corresponding $<PRODUCT_NAME>_INC and $<PRODUCT_NAME>_LIB environment variables. In addition to the individual products, there is a "@larsoft@" product that can be used to set up all other products with a single command:  
97 36 Erica Snider
98 40 Erica Snider
setup larsoft <version> -q <qualifiers>
99 36 Erica Snider
100 36 Erica Snider
The versions and qualifiers available can be obtained by using the following command:
101 36 Erica Snider
102 36 Erica Snider
ups list -aK+ larsoft
103 1 Brian Rebel
104 43 Erica Snider
The qualifiers will be one of the following: "debug:e2", "prof:e2", "opt:e2", where:
105 1 Brian Rebel
106 36 Erica Snider
* debug = debugging symbols available
107 43 Erica Snider
* opt = compiler optimizations enabled, no debug symbols
108 36 Erica Snider
* prof = compiler optimizations enabled, profiling code generated
109 43 Erica Snider
* e2 = built with gcc 4.7.1 and -std=c++0x
110 36 Erica Snider
111 43 Erica Snider
In general, only @debug@ and @prof@ versions will be provided, since there is no run-time performance penalty for code that has the profiling code present.
112 41 Erica Snider
113 43 Erica Snider
The recommended way to work with LArSoft is to use *@mrb@*, the multi-repository build tool, to check out and build your own code. This build system is based upon *@cmake@* and a toolkit of @cmake@ macros in the *@cetbuildtools@* product -- the same set of tools that are used to build the @art@ framework that underpins LArSoft. @mrb@ operates above @cmake@ and drives the build procedure across (possibly) multiple repositories within one's working area. Using @mrb@ ensures the integrity and structure of the working. 
114 38 Erica Snider
115 1 Brian Rebel
One's working directory within this system has the following structure:  a source code sub-directory where all development takes place; a build sub-directory where all build activities take place; and a local products area, where all successfully built software is installed, and from which it can be run.
116 43 Erica Snider
117 51 Erica Snider
All software packages built and installed by @mrb@ / @cmake@ / @cetbuildtools@ are in the form of a re-locatable ups products. (A "re-locatable" ups product has a simplified structure compared to that of legacy ups products, and does not require that it be "declared" to a ups database. These features simplify distribution, installation and maintenance of re-locatable products.) @mrb@ provides a simple product template that includes two files that must be modified by the user:  a top-level @CMakeLists.txt@ file, that specifies which sub-directories will be included in the build along with any global configuration needed to build the product; and a @product_deps@ file that specifies the dependencies for the package. The product template can otherwise be customized for an experiment. Although this scheme may sound cumbersome and arcane, it is essentially no different than following the package structure conventions imposed by SRT, using a GNUmakefile to configure the build, and a global release setup script to configure the global environment. With @cmake@, the GNUmakefiles are replaced by @CMakeLists.txt@ files, while the "global environment" for the product is managed locally with the @product_deps@ and top-level CMakeLists.txt files for the product. @mrb@ then manages all the details of utilizing ups to configure the build environment, driving the build, and packaging and installing the ups product in the local products area.
118 1 Brian Rebel
119 43 Erica Snider
120 45 Erica Snider
h3. The LArSoft developer environment
121 41 Erica Snider
122 46 Erica Snider
As previously mentioned, all LArSoft code is archived in a set of repositories based on the "git version control system": There are numerous resources on the web on how to use git, starting with the authoritative "Pro Git Book": and "git reference manual": provided on the official git website. A search on "git documentation" yields many more.
123 1 Brian Rebel
124 46 Erica Snider
The LArSoft project has adopted the git branching model described at "": to assist with managing the development workflow and maintaining a stable development environment. Within this framework, the git repositories have the following branch structure:
125 41 Erica Snider
* A "main" branch that will have only tagged releases. Used only by the software manager.
126 41 Erica Snider
* A "develop" branch that will have the working head of the repository. Used by all developers.
127 45 Erica Snider
* One or more "release" branches for the integration of specific tagged releases. Used or authorized only by the software manager.
128 45 Erica Snider
* An arbitrary set of "feature" branches on which all on-going work takes place. In most cases, these branches will be in local repositories, although publishing them to the reference repository is useful in many cases. Developers can create as many feature branches as needed. 
129 45 Erica Snider
* One or more "hotfix" branches that is used to develop patches to tagged releases. Used or authorized only by the software manager. 
130 1 Brian Rebel
131 45 Erica Snider
The "git flow": tool is a set of git extension that provide high-level operations for working within this branching model. We recommend that developers utilize @git flow@ when developing LArSoft code. Developers who choose not to use @git flow@ should nonetheless adhere to the branching model.
132 41 Erica Snider
133 41 Erica Snider
134 41 Erica Snider
135 41 Erica Snider
136 41 Erica Snider
137 45 Erica Snider
h2. Links to the tools used in working with the software
138 32 Erica Snider
139 32 Erica Snider
*  git
140 32 Erica Snider
*  git flow
141 32 Erica Snider
*  mrb : the multi-repository build tool
142 32 Erica Snider
*  Re-locatable ups
143 32 Erica Snider
*  cmake
144 33 Erica Snider
145 33 Erica Snider
146 45 Erica Snider
h1. How-to's
147 33 Erica Snider
148 33 Erica Snider
149 33 Erica Snider
h2. Advanced technical how-to's
150 33 Erica Snider
151 33 Erica Snider
h2. Release procedures
152 33 Erica Snider
153 1 Brian Rebel
h1. Walk-through exercises
154 33 Erica Snider
155 51 Erica Snider
h1. LArSoft code management and distribution procedures
156 34 Erica Snider
157 34 Erica Snider
h1. Working areas
158 34 Erica Snider
159 34 Erica Snider
[[Beta re-factoring]]