MCenter Control Room (MC-CR) x3726 or x8871
Call the MCR if the beam goes away for more than a few spills, look for Accelerator Alarms in ACNET (a default window). If the problem persists a few minutes, and you see nothing about it in the MCR elog, (or you just really to find out more), call the MCR.

• The LArIAT supercycle How DAQ operations relate to the supercycle

Shifter, use these:¶

• LAriaT e-Log
• ACNET
• Run the Wire Chamber mini-DAQ
• How to control and monitor PMT HV

Shifter, look at these¶

• Beam Monitor Display
• Operations Elog

Hardware Connections¶

• Non-TPC Detectors Naming and numbering in MC7
• Connections on the Control Room Patch Panel

• Logical inputs to the CAEN V1740
• Connections into the WUT TDC
• Connections into the V1751 Digitizer
• Connections in/out of the V1495 Trigger

Hardware Documentation¶

• Link to LArIAT eLog http://dbweb0.fnal.gov/ECL/lariat
• LariatOnlineGit Accessing the LArIAT Online GIT repository

• LArIAT TPC Readout Parameters
• LArIAT DAQ Commercial Products Technical Documentation and Firmware Files
• Test Beam Wire Chamber Sten Hensen's TDC Readout Documentation
• Jinyuan's TDC Documentation
• v1495 notes Notes and working area for the V1495 and V2718

• DAQ Configuration settings, parameters, starting a run
• Raw Data Format and Readout Source code
• All things lariat-artdaq (UPDATED 7/21/14)

• LArIAT Test Stand Photographs
• Logic pulse widths and discriminator thresholds

Meetings¶

• Connecting to LArIAT ReadyTalk