Project

General

Profile

Wiki » History » Version 126

« Previous - Version 126/332 (diff) - Next » - Current version
Flor de maria Blaszczyk, 03/11/2015 03:44 PM


MCenter Control Room (MC-CR) x3726 or x8871
  • Call the Main Control Room (x3721) at the start and at the end of shift. This is required, and pleasant.
  • If the beam goes away for more than a few spills, look for Accelerator Alarms in ACNET (a default window). If the problem persists a few minutes, and you see nothing about it in the MCR elog, (or you just really want to find out more), call the MCR. They're friendly, though they may be super-busy.

Shifter, use these

Shifter, look at these

Troubleshooting

  • If your Kerberos username and password are good, but you can't log on to FTBFLX[NN] machines: Have someone who CAN log into those machines heck that your kerberos principal appears in ~ftbf_user/.k5login in the LArIAT section.
  • If you cannot ssh to FTBFLX machines: Get a kerberos ticket for yourself, then ssh ftbf_user@ftbflx01 (or whichever machine...).
  • If the wire chamber mini-DAQ is skipping spill numbers, it may be a high trigger rate (> 30 k per spill). The wire chamber controller may still be reading out the hits from the last spill.

Hardware Connections and Configurations

Electronic Hardware Documentation

Diagnostic and Control Software

Test programs in the lariat-online/daq/src directory

Examining the WC mini DAQ ASCII data

The Processor makes TTrees from the ASCII files saved by mc7-daq.py
WC MiniDAQ Data Processor

Data Files

Data files for various beam conditions can be found in the DataFiles page.

LArIAT Data Acquisition Format

Meetings