Project

General

Profile

WaveDump » History » Version 1

William Badgett, 03/31/2015 05:23 PM

1 1 William Badgett
h1. WaveDump
2 1 William Badgett
3 1 William Badgett
To launch WaveDump utility, log into lariat-daq02 as the lariat group account 
4 1 William Badgett
and first type the following:
5 1 William Badgett
6 1 William Badgett
   ssh lariat@lariat-daq02
7 1 William Badgett
   cd wavedump-3.5.3/src
8 1 William Badgett
   emacs WaveDumpConfig.txt &
9 1 William Badgett
10 1 William Badgett
Edit the WaveDumpConfig.txt to select which board you wish to view.  The board 
11 1 William Badgett
selection line will look like this:
12 1 William Badgett
13 1 William Badgett
    OPEN PCI 1 5 0
14 1 William Badgett
15 1 William Badgett
The "1" is for which PCI optical link chain, where "1" is the V1740s and "3" is the V1751s.
16 1 William Badgett
The "5" here selects board number five (starting from zero) on the link chain, 
17 1 William Badgett
from 0 to 7 for V1740s and 0 or 1 for V1751s.
18 1 William Badgett
19 1 William Badgett
To start the WaveDump from the same directory, type:
20 1 William Badgett
21 1 William Badgett
   ./wavedump WaveDumpConfig.txt
22 1 William Badgett
23 1 William Badgett
At this point you can type the space bar to get help.   Useful commands are:
24 1 William Badgett
25 1 William Badgett
   s   Start or stop data acquistion
26 1 William Badgett
   P   Start or stop the continuous plotting of the data
27 1 William Badgett
   p   Plot one trigger