Project

General

Profile

LArIAT Run 2 Shifter Instructions » History » Version 99

Jason St. John, 04/07/2016 06:02 PM

1 2 Jason St. John
h1. LArIAT Run 2 Shifter Instructions
2 1 Jason St. John
3 40 Jason St. John
*_Remember to call MCR (x3721) at the beginning and ending of each shift!!!_*
4 54 Jason St. John
Main Control Room (internationally) +1.630.840.3721
5 1 Jason St. John
6 1 Jason St. John
h2. Please don't hesitate to contact the experts when something doesn't look right!!!
7 67 Jason St. John
%{color:red}"Troubleshooting Problems":https://cdcvs.fnal.gov/redmine/projects/lariat-online/wiki#Troubleshooting%
8 1 Jason St. John
9 79 Jason St. John
[[Before your first shift at LArIAT]] Check here so you're ready.
10 53 Jason St. John
11 1 Jason St. John
h1.  %{color:green}At the start of the shift%
12 88 Jason St. John
13 88 Jason St. John
[[How to set up your shift station]]
14 81 Jason St. John
15 83 Jason St. John
* In the LArIAT "e-log":http://dbweb6.fnal.gov:8080/ECL/lariat/E/index, fill out the *Start of Shift Checklist*
16 1 Jason St. John
* Find out from the shifter before you if there are any issues.
17 83 Jason St. John
* Refresh and read the "Run Plan":https://redmine.fnal.gov/redmine/projects/lariat-online/wiki/Run_Plan:
18 83 Jason St. John
** what beam request LArIAT wants
19 83 Jason St. John
** any interruptions to expect
20 83 Jason St. John
** special conditions or known problems
21 81 Jason St. John
22 86 Jason St. John
h1.  %{color:green}During the shift%
23 16 Luke Batten
24 97 Jason St. John
The shifter is responsible for the *beam and the detectors*, *data taking*, and maintaining *data quality*. 
25 80 Jason St. John
26 89 Jason St. John
* If you have questions, use Google Hangouts: send an email to lariat.shift@gmail.com to get invitation.
27 89 Jason St. John
* If that doesn't work please call an expert! "LArIAT Call List":https://docs.google.com/spreadsheets/d/1BCeFLgITn6lzCUgPFUd5y_5taIngt-yKgxg8y2l-tNY/edit?usp=sharing
28 1 Jason St. John
29 86 Jason St. John
h2. Starting a new run
30 1 Jason St. John
31 92 Jason St. John
* In the DAQ terminal window, type <pre>go 500</pre>  "Detailed DAQ instructions":https://redmine.fnal.gov/redmine/projects/lariat-online/wiki/LArIAT_DAQ_Instructions
32 98 Jason St. John
* The DAQ should make an e-log entry for your automatically.
33 1 Jason St. John
34 86 Jason St. John
h2. During an ongoing run
35 1 Jason St. John
36 98 Jason St. John
h3. Beam and detectors
37 99 Jason St. John
38 96 Jason St. John
* "ACNET":https://redmine.fnal.gov/redmine/projects/lariat-online/wiki/Using_ACNET_for_monitoring to monitor the beam intensity and quality, especially:
39 96 Jason St. John
** the *S60* page of ACNET (intensity constant and not too high)
40 96 Jason St. John
** the profile plots for *MC7WC1* and *MC7WC2*. (beam is focused on target in MC7)
41 96 Jason St. John
* Synoptic (detector conditions alarms: everything on, not too much current, no temperatures too high, TPC safely submerged in LAr, etc..)
42 1 Jason St. John
43 98 Jason St. John
h3. Data taking
44 99 Jason St. John
45 96 Jason St. John
* "Run Status Webpage":http://lariat-wbm.fnal.gov/lariat/run-alert.html to monitor the run status (run number, number of spills, numbers of triggers, etc)
46 96 Jason St. John
** Note that, on the Run Status Webpage, %{color:red}if the run time appears red%, and the spills stop increasing, %{color:red}the run has come to a stop.%  It will also speak an audible alert, once. *Start a new run immediately.*
47 1 Jason St. John
** Sometimes the Run Status page freezes. Refresh it to check.
48 99 Jason St. John
* Useful: "Recent run history":http://lariat-wbm.fnal.gov/wbm/servlet/LariatRunSummary
49 95 Jason St. John
50 98 Jason St. John
h3. Data quality
51 99 Jason St. John
52 93 Jason St. John
* "Online DQM":http://lariat-dqm.fnal.gov/ to check basic data integrity. 
53 96 Jason St. John
** "Data Stream metrics":http://lariat-dqm.fnal.gov/metrics/data-stream shows that all front-end electronics are delivering data.
54 96 Jason St. John
** "Data stream page":http://lariat-dqm.fnal.gov/data-stream?live shows if pedestal events, beam events, and cosmic events are all good.
55 96 Jason St. John
* "Event Viewer":https://cdcvs.fnal.gov/redmine/projects/lariat-online/wiki/Event_viewers to see TPC events.  
56 96 Jason St. John
** If every beam event is too crowded and there are no simple events: consult the experts on Google Hangouts. They may ask you to call the MCR to request lower beam intensity.
57 96 Jason St. John
** If you +decide to post some interesting event+ in the e-log, +please write the number of the spill/event in the title or content of the entry+. It's much easier to search for them later!
58 1 Jason St. John
59 99 Jason St. John
60 1 Jason St. John
61 84 Jason St. John
h1. Troubleshooting Problems
62 1 Jason St. John
63 84 Jason St. John
* Most problems solved: "Troubleshooting Page":https://cdcvs.fnal.gov/redmine/projects/lariat-online/wiki#Troubleshooting 
64 84 Jason St. John
* Still need help? "Call an expert":https://docs.google.com/spreadsheets/d/1BCeFLgITn6lzCUgPFUd5y_5taIngt-yKgxg8y2l-tNY/edit?usp=sharing
65 1 Jason St. John
66 1 Jason St. John
* If a VME Power Supply has to be turned off in an emergency situation (e.g. problem with TPC PMTs) - turn off the regulate function first, then put the decreasing voltage values in the quick ramp window, go to 0 and then turn off!
67 1 Jason St. John
68 84 Jason St. John
h1.  %{color:green}At the end of the shift%
69 1 Jason St. John
70 84 Jason St. John
* Make an entry in the e-Log using the form "Shift Summary" summing up the relevant information from the shift. For any other information to be posted in the e-Log during the shift use the "default" form. 
71 1 Jason St. John
72 84 Jason St. John
 *_Remember to call MCR at the beginning and ending of each shift!!!_*
73 1 Jason St. John
74 1 Jason St. John
h1. *_Remember to call MCR at the beginning and ending of each shift!!!_*