Project

General

Profile

LArIAT Run 2 Shifter Instructions » History » Version 79

Jason St. John, 04/07/2016 03:51 PM

1 2 Jason St. John
h1. LArIAT Run 2 Shifter Instructions
2 1 Jason St. John
3 40 Jason St. John
*_Remember to call MCR (x3721) at the beginning and ending of each shift!!!_*
4 54 Jason St. John
Main Control Room (internationally) +1.630.840.3721
5 1 Jason St. John
6 1 Jason St. John
h2. Please don't hesitate to contact the experts when something doesn't look right!!!
7 67 Jason St. John
%{color:red}"Troubleshooting Problems":https://cdcvs.fnal.gov/redmine/projects/lariat-online/wiki#Troubleshooting%
8 1 Jason St. John
9 79 Jason St. John
[[Before your first shift at LArIAT]] Check here so you're ready.
10 53 Jason St. John
11 79 Jason St. John
[[How to set up your shift station]]
12 53 Jason St. John
13 1 Jason St. John
h2.  %{color:green}During the shift%
14 16 Luke Batten
15 12 Luke Batten
* If you have questions, call an expert! "LArIAT Call List":https://docs.google.com/spreadsheets/d/1BCeFLgITn6lzCUgPFUd5y_5taIngt-yKgxg8y2l-tNY/edit?usp=sharing
16 16 Luke Batten
* Or, you can use Google Hangouts: send an email to lariat.shift@gmail.com to get invitation.
17 1 Jason St. John
18 1 Jason St. John
What beam should I request? The "Run Plan":https://redmine.fnal.gov/redmine/projects/lariat-online/wiki/Run_Plan lists current and upcoming beam requests, along with the other MCenter activities going on.
19 1 Jason St. John
20 1 Jason St. John
h3. Starting a new run
21 1 Jason St. John
22 6 Luke Batten
* Open in a new tab [[LArIAT DAQ Instructions]] and follow the instructions to start a new run.
23 64 Jason St. John
* The DAQ should make an e-log entry for your automatically. 
24 38 Jason St. John
* Special cases:
25 38 Jason St. John
** *Change/check the DAQ configuration* see "DAQ Configuration Instructions":https://redmine.fnal.gov/redmine/projects/lariat-online/wiki/1495ShifterInstructions
26 38 Jason St. John
** *Changing gain or filter times* in the ASICS: check that there was [[Teensy Output]] in the initialization spew from the DAQ.
27 1 Jason St. John
28 1 Jason St. John
h3. During an ongoing run
29 1 Jason St. John
30 1 Jason St. John
* Monitor the beam status using the instructions in the "Using ACNET for monitoring":https://redmine.fnal.gov/redmine/projects/lariat-online/wiki/Using_ACNET_for_monitoring, namely 
31 1 Jason St. John
** the *S60* page of ACNET and 
32 29 Luke Batten
** the profile plots for *MC7WC1* and *MC7WC2*.
33 1 Jason St. John
** From ~ftbf_user/acnet or ~lariat/acnet, run @./LArIATViewer.sh@ to open the Synoptic displays.
34 1 Jason St. John
35 39 Jason St. John
* "Run Status Webpage":http://lariat-wbm.fnal.gov/lariat/run-alert.html to monitor the run status (run number, number of spills, number of triggers, etc)
36 78 Jason St. John
** Note that, on the Run Status Webpage, %{color:red}if the run time appears red%, and the spills stop increasing, the run has come to a stop.  It will also speak an audible alert, once.
37 20 Luke Batten
** In order to get it running again, you can issue the 'lariatReset' command in the DAQ terminal, followed by 'go'.
38 1 Jason St. John
** Sometimes the Run Status page freezes. If this happens, see if your DAQ command line has reset. If so, the run has ended. Follow above instructions.
39 78 Jason St. John
** Did the run number fail to increment?  If the number has reset to a low number such as 1 stop the run and then edit /opt/lariat-online/config/runNumber.dat to correct the run number. Start new run after.
40 78 Jason St. John
41 37 Jason St. John
* "Online DQM":http://lariat-dqm.fnal.gov/ to check basic data integrity. 
42 78 Jason St. John
** "Data Stream":http://lariat-dqm.fnal.gov/metrics/data-stream
43 1 Jason St. John
* Use the event viewer to see TPC events. See "Event Viewer Instructions":https://cdcvs.fnal.gov/redmine/projects/lariat-online/wiki/Event_viewers . If you +decide to post some interesting event+ in the e-log, +please write the number of the spill/event in the title or content of the entry+. It's much easier to search for them later!
44 78 Jason St. John
* Useful: "Recent run history":http://lariat-wbm.fnal.gov/wbm/servlet/LariatRunSummary
45 1 Jason St. John
46 60 Jason St. John
h1. Troubleshooting
47 1 Jason St. John
48 57 Jason St. John
Most problems solved: "Troubleshooting Page":https://cdcvs.fnal.gov/redmine/projects/lariat-online/wiki#Troubleshooting doesn't help, "call an expert":https://docs.google.com/spreadsheets/d/1BCeFLgITn6lzCUgPFUd5y_5taIngt-yKgxg8y2l-tNY/edit?usp=sharing
49 1 Jason St. John
50 58 Jason St. John
* If a VME Power Supply has to be turned off in an emergency situation (e.g. problem with TPC PMTs) - turn off the regulate function first, then put the decreasing voltage values in the quick ramp window, go to 0 and then turn off!
51 1 Jason St. John
52 1 Jason St. John
h2.  %{color:green}At the end of the shift%
53 1 Jason St. John
54 11 Luke Batten
* Make an entry in the e-Log using the form "Shift Summary" summing up the relevant information from the shift (make sure to include the total trigger counts for the V1751s and V1740s). For any other information to be posted in the e-Log during the shift use the "default" form. 
55 1 Jason St. John
* IF NO SHIFTER IS TAKING OVER FROM YOU
56 1 Jason St. John
# Call MCR to stop the beam 
57 1 Jason St. John
58 1 Jason St. John
h2. *_Remember to call MCR at the beginning and ending of each shift!!!_*
59 1 Jason St. John
60 1 Jason St. John
h1. *_Remember to call MCR at the beginning and ending of each shift!!!_*