Project

General

Profile

LArIAT Run 2 Shifter Instructions » History » Version 105

Jason St. John, 04/09/2016 09:59 AM

1 40 Jason St. John
*_Remember to call MCR (x3721) at the beginning and ending of each shift!!!_*
2 1 Jason St. John
Main Control Room (internationally) +1.630.840.3721
3 54 Jason St. John
4 100 Jason St. John
*Please don't hesitate to contact the experts when something doesn't look right!!!*
5 105 Jason St. John
%{color:red}"Troubleshooting Problems":https://cdcvs.fnal.gov/redmine/projects/lariat-online/wiki#Troubleshooting% for help
6 100 Jason St. John
7 100 Jason St. John
{{toc}}
8 1 Jason St. John
9 79 Jason St. John
[[Before your first shift at LArIAT]] Check here so you're ready.
10 53 Jason St. John
11 1 Jason St. John
h1.  %{color:green}At the start of the shift%
12 88 Jason St. John
13 88 Jason St. John
[[How to set up your shift station]]
14 81 Jason St. John
15 104 Jason St. John
* In the LArIAT "e-log":http://dbweb0.fnal.gov/ECL/lariat/E/index, fill out the *Start of Shift Checklist*
16 103 Jason St. John
** Instructions to check how much remaining "Wire Chamber Gas":https://redmine.fnal.gov/redmine/projects/lariat-online/wiki/Wire_Chamber_GasElectronics_Instructions
17 1 Jason St. John
* Find out from the shifter before you if there are any issues.
18 83 Jason St. John
* Refresh and read the "Run Plan":https://redmine.fnal.gov/redmine/projects/lariat-online/wiki/Run_Plan:
19 83 Jason St. John
** what beam request LArIAT wants
20 83 Jason St. John
** any interruptions to expect
21 83 Jason St. John
** special conditions or known problems
22 81 Jason St. John
23 86 Jason St. John
h1.  %{color:green}During the shift%
24 16 Luke Batten
25 102 Jason St. John
The shifter is responsible for the *beam and the detector heath*, *data taking*, logging what happens in the *e-log*,and maintaining *data quality*. 
26 80 Jason St. John
27 89 Jason St. John
* If you have questions, use Google Hangouts: send an email to lariat.shift@gmail.com to get invitation.
28 89 Jason St. John
* If that doesn't work please call an expert! "LArIAT Call List":https://docs.google.com/spreadsheets/d/1BCeFLgITn6lzCUgPFUd5y_5taIngt-yKgxg8y2l-tNY/edit?usp=sharing
29 1 Jason St. John
30 86 Jason St. John
h2. Starting a new run
31 1 Jason St. John
32 92 Jason St. John
* In the DAQ terminal window, type <pre>go 500</pre>  "Detailed DAQ instructions":https://redmine.fnal.gov/redmine/projects/lariat-online/wiki/LArIAT_DAQ_Instructions
33 101 Jason St. John
* The DAQ should make an e-log entry for you automatically.
34 1 Jason St. John
35 86 Jason St. John
h2. During an ongoing run
36 1 Jason St. John
37 102 Jason St. John
h3. Beam and detector health
38 99 Jason St. John
39 96 Jason St. John
* "ACNET":https://redmine.fnal.gov/redmine/projects/lariat-online/wiki/Using_ACNET_for_monitoring to monitor the beam intensity and quality, especially:
40 96 Jason St. John
** the *S60* page of ACNET (intensity constant and not too high)
41 96 Jason St. John
** the profile plots for *MC7WC1* and *MC7WC2*. (beam is focused on target in MC7)
42 96 Jason St. John
* Synoptic (detector conditions alarms: everything on, not too much current, no temperatures too high, TPC safely submerged in LAr, etc..)
43 1 Jason St. John
44 98 Jason St. John
h3. Data taking
45 99 Jason St. John
46 96 Jason St. John
* "Run Status Webpage":http://lariat-wbm.fnal.gov/lariat/run-alert.html to monitor the run status (run number, number of spills, numbers of triggers, etc)
47 96 Jason St. John
** Note that, on the Run Status Webpage, %{color:red}if the run time appears red%, and the spills stop increasing, %{color:red}the run has come to a stop.%  It will also speak an audible alert, once. *Start a new run immediately.*
48 1 Jason St. John
** Sometimes the Run Status page freezes. Refresh it to check.
49 1 Jason St. John
* Useful: "Recent run history":http://lariat-wbm.fnal.gov/wbm/servlet/LariatRunSummary
50 102 Jason St. John
51 102 Jason St. John
h3. E-log
52 102 Jason St. John
53 104 Jason St. John
* "E-log:"http://dbweb0.fnal.gov/ECL/lariat/E/index site for recording anything of significance which is relevant to the experiment. 
54 95 Jason St. John
55 98 Jason St. John
h3. Data quality
56 99 Jason St. John
57 93 Jason St. John
* "Online DQM":http://lariat-dqm.fnal.gov/ to check basic data integrity. 
58 96 Jason St. John
** "Data Stream metrics":http://lariat-dqm.fnal.gov/metrics/data-stream shows that all front-end electronics are delivering data.
59 96 Jason St. John
** "Data stream page":http://lariat-dqm.fnal.gov/data-stream?live shows if pedestal events, beam events, and cosmic events are all good.
60 96 Jason St. John
* "Event Viewer":https://cdcvs.fnal.gov/redmine/projects/lariat-online/wiki/Event_viewers to see TPC events.  
61 96 Jason St. John
** If every beam event is too crowded and there are no simple events: consult the experts on Google Hangouts. They may ask you to call the MCR to request lower beam intensity.
62 96 Jason St. John
** If you +decide to post some interesting event+ in the e-log, +please write the number of the spill/event in the title or content of the entry+. It's much easier to search for them later!
63 1 Jason St. John
64 99 Jason St. John
65 1 Jason St. John
66 84 Jason St. John
h1. Troubleshooting Problems
67 1 Jason St. John
68 84 Jason St. John
* Most problems solved: "Troubleshooting Page":https://cdcvs.fnal.gov/redmine/projects/lariat-online/wiki#Troubleshooting 
69 84 Jason St. John
* Still need help? "Call an expert":https://docs.google.com/spreadsheets/d/1BCeFLgITn6lzCUgPFUd5y_5taIngt-yKgxg8y2l-tNY/edit?usp=sharing
70 1 Jason St. John
71 1 Jason St. John
* If a VME Power Supply has to be turned off in an emergency situation (e.g. problem with TPC PMTs) - turn off the regulate function first, then put the decreasing voltage values in the quick ramp window, go to 0 and then turn off!
72 1 Jason St. John
73 84 Jason St. John
h1.  %{color:green}At the end of the shift%
74 1 Jason St. John
75 84 Jason St. John
* Make an entry in the e-Log using the form "Shift Summary" summing up the relevant information from the shift. For any other information to be posted in the e-Log during the shift use the "default" form. 
76 1 Jason St. John
77 84 Jason St. John
 *_Remember to call MCR at the beginning and ending of each shift!!!_*
78 1 Jason St. John
79 1 Jason St. John
h1. *_Remember to call MCR at the beginning and ending of each shift!!!_*