Connections into the WUT TDC - Run 1 and part of Run 2¶

Rationale: the C channels of the WUT have three thresholds and are better for timing. The D channels have only one threshold. I decided to put the two DS PMTs into the C channels as well as 2 US PMTs, chosen because they were better behaved and on opposite sides of the counter.

• USTOF1 = Upper Left --> WUTD0
• USTOF2 = Lower Left --> WUTC0
• USTOF3 = Lower Right --> WUTD1 XXXXXXX NOT CONNECTED!!
• LARIAT FAST TRIGGER NIM --> WUTD1 for timing verification
• USTOF4 = Upper Right --> WUTC1

• DSTOF1 = Right --> WUTC2
• DSTOF2 = Left --> WUTC3

• SC3 = Downstream FTBF scintillator paddle --> WUTD3

WUTD2 left empty for the moment. Might put the CER there.

The upper LEMO input is fed by the RESET pulse, see The_LArIAT_supercycle. On a NIM logical high it resets the WUT's counters.

The lower LEMO input is fed the fast trigger. When operated with <externalTrigger>1</externalTrigger> it should only save timeframes in which a trigger occurs.

Connection into the WUT - Run 2 after 2016.05.02 15:30¶

Staring at the top of the WUT and going down:

• WUT C3 DSTOF2
• WUT C2 DSTOF2
• WUT C1 USTOF4
• WUT C0 USTOF2

• WUT D3 no connection
• WUT D2 no connection
• WUT D1 USTOF3
• WUT D0 USTOF4

During part of Run 2 the WUT was on hiatus to see if it was inducing
noise elsewhere. It was not.