Communicating with the wire chambers » History » Version 7
« Previous -
Version 7/28
(diff) -
Next » -
Current version
Jason St. John, 08/06/2014 02:23 PM
Communicating with the wire chambers¶
Running the Wire Chamber Mini-DAQ¶
setup ftbf
cd ~ftbf_user/experiments/mc7
Look in instructions.txt
When you have a few seconds before a spill (in case you want to type a comment before you start the run)
./daq-mc7.py
This daq fills one data file, appending each spill, until the user stops it.
Looking at the data, Beam Study¶
ssh ftbflx01
setup cern
cd ~ftbf_user/experiments/mv7/BmStud
How to do a hard reboot of the WC¶
If the wire chamber controller at ftbfwc02 starts refusing connections it may need a reboot:
- from a browser go to http://ftbf-pdu00.fnal.gov
- User: admin Password: <on the board in the CR>
- Navigate to this screen:
- click on "Outlet 6" and then choose "Immediate Reboot" from the menu at the top
- The state will change to "Off" but will be pending. Wait a little while and refresh the screen or log back in. The WC should be back on.