Project

General

Profile

Communicating with the wire chambers » History » Version 3

Jason St. John, 07/31/2014 03:33 PM

1 1 Michael Kordosky
h1. Communicating with the wire chambers
2 1 Michael Kordosky
3 2 Jason St. John
h2. Running the Wire Chamber Mini-DAQ
4 2 Jason St. John
5 3 Jason St. John
setup
6 3 Jason St. John
cd ~ftbf_user/experiments/mc7
7 3 Jason St. John
Look in instructions.txt
8 2 Jason St. John
9 3 Jason St. John
When you have a few seconds before a spill (in case you want to 
10 3 Jason St. John
./daq-mc7.py
11 3 Jason St. John
12 3 Jason St. John
This daq makes one file 
13 3 Jason St. John
14 3 Jason St. John
h2. Looking at the data, Beam Study
15 3 Jason St. John
16 3 Jason St. John
setup cern
17 3 Jason St. John
cd ~ftbf_user/experiments/mv7/BmStud
18 2 Jason St. John
19 1 Michael Kordosky
h2. How to do a hard reboot of the WC
20 1 Michael Kordosky
21 1 Michael Kordosky
If the wire chamber controller at ftbfwc02 starts refusing connections it may need a reboot:
22 1 Michael Kordosky
23 1 Michael Kordosky
* from a browser go to http://ftbf-pdu00.fnal.gov
24 1 Michael Kordosky
* User: admin   Password: <on the board in the CR>
25 1 Michael Kordosky
* Navigate to this screen:
26 1 Michael Kordosky
27 1 Michael Kordosky
!ftbfpdu00_control_screen.png!
28 1 Michael Kordosky
29 1 Michael Kordosky
* click on "Outlet 6" and then choose "Immediate Reboot" from the menu at the top
30 1 Michael Kordosky
* The state will change to "Off" but will be pending. Wait a little while and refresh the screen or log back in. The WC should be back on.