Communicating with the wire chambers » History » Version 2

« Previous - Version 2/28 (diff) - Next » - Current version
Jason St. John, 07/31/2014 03:26 PM

Communicating with the wire chambers

Running the Wire Chamber Mini-DAQ

How to do a hard reboot of the WC

If the wire chamber controller at ftbfwc02 starts refusing connections it may need a reboot:

  • click on "Outlet 6" and then choose "Immediate Reboot" from the menu at the top
  • The state will change to "Off" but will be pending. Wait a little while and refresh the screen or log back in. The WC should be back on.