Communicating with the wire chambers » History » Version 10
Communicating with the wire chambers¶
Running the Wire Chamber Mini-DAQ¶
Look in instructions.txt
When you have a few seconds before a spill (in case you want to type a comment before you start the run)
Example comment: Good beam 32 GeV, 100 A. 2.5E+05 at MC7SC1
This daq fills one data file, appending each spill, until the user stops it.
Looking at the data, Beam Study¶
How to do a hard reboot of the WC¶
If the wire chamber controller at ftbfwc02 starts refusing connections it may need a reboot:
- from a browser go to http://ftbf-pdu00.fnal.gov
- User: admin Password: <on the board in the CR>
- Navigate to this screen:
- click on "Outlet 6" and then choose "Immediate Reboot" from the menu at the top
- The state will change to "Off" but will be pending. Wait a little while and refresh the screen or log back in. The WC should be back on.