Recommended SAM Datasets¶

TPC_voltages_nominal : Optimal voltages depend on wireplane spacing and wire pitch!

detector.cathode_voltage > 23000 and 
detector.collection_voltage > 320 and detector.collection_voltage < 350 and 
detector.induction_voltage < '-10' and detector.induction_voltage > '-20' and 
detector.shield_voltage < '-290' and detector.shield_voltage > '-310' 

TPC_MaxGainAndFilter

lariat_larasic_config_larasic_collection_filter 3 and 
lariat_larasic_config_larasic_collection_gain 3 and
lariat_larasic_config_larasic_induction_filter 3 and 
lariat_larasic_config_larasic_induction_gain 3

TPC_nominal_read_out_and_timing

lariat_larasic_config_larasic_enablereadout 1 and 
lariat_larasic_config_larasic_pulseron 0 and
 lariat_larasic_config_larasic_channelscan 0 and
lariat_v1740_config_caen_recordlength 3072 and l
ariat_v1740_config_caen_postpercent 0 and 
lariat_v1495_config_v1495_delay_ticks 36900

BothTOF_OnAndReadOut

tertiary.ustof on and 
tertiary.dstof on and 
lariat_v1751_config_caen_enablereadout 1

AllMWPC_OnAndReadOut

tertiary.mwpc1 on and tertiary.mwpc2 on and tertiary.mwpc3 on and tertiary.mwpc4 on and 
lariat_tdc_config_tdc_enablereadout 1 and
lariat_tdc_config_tdc_pulserenable 0

Preliminary Run-III (RunIIIPreliminaryDef) dataset definition to look at the data*

RunIIIPreliminaryDef : This is now a samweb dataset definition available for others to use in their xml

@<inputdef>RunIIIPreliminaryDef</inputdef> @

The definition of the dataset is:

"data_tier = raw and run_number > 10827 and lariat_end_f_mc7sc1 > 5000 and detector.cathode_voltage > 23000 and Defname:BothTOF_OnAndReadOut and Defname:AllMWPC_OnAndReadOut" 

Lovely1 dataset definition to look at data with good beamline info

Lovely1 : This is now a samweb dataset definition available for others to use in their xml

@<inputdef>Lovely1</inputdef> @

The definition of the dataset is:

"defname: TPC_voltages_nominal and defname: TPC_MaxGainAndFilter and defname: TPC_nominal_read_out_and_timing and defname: BothTOF_OnAndReadOut and defname: AllMWPC_OnAndReadOut" 

Lovely1_Neg_RunII_elenag_v03 dataset definition to look at the RunII data with good beamline info

Lovely1_Neg_RunII_elenag_v03 : This is now a samweb dataset definition available for others to use in their xml

@<inputdef>Lovely1_Neg_RunII_elenag_v03</inputdef> @

The definition of the dataset is:

"defname: Lovely1 and data_tier digits and lariat_mid_f_mc7anb < 0 and run_number >= 8000 and run_number <= 10226" 

Lovely1_Pos_RunII_jhugon_v01

Dataset definition to look at the RunII data with good beamline info and positive magnet polarity. 5217 files. The definition of the dataset is:

"defname: Lovely1 and data_tier digits and lariat_mid_f_mc7anb > 0 and run_number >= 8000 and run_number <= 10226"