Project

General

Profile

Information about job submission to OSG sites » History » Version 65

« Previous - Version 65/162 (diff) - Next » - Current version
Kenneth Herner, 03/07/2016 10:39 AM


Information about job submission to OSG sites

This page captures some of the known quirks about certain sites when submitting jobs there.

What this page is

Most OSG sites will work with with the jobsub default requests of 2000 MB of RAM and 35 GB of disk, but at some sites there are some more strict limits. Additionally some sites only support certain experiments as opposed to the entire Fermilab VO. Here we list the OSG sites where users can submit jobs, along with all known cases where either the standard jobsub defaults may not work, or the site only supports certain experiments. Information on it is provided on a best-effort basis and is subject to change without notice.

What this page is NOT

This page is NOT a status board or health monitor of the OSG sites. Just because your submission fits in with the guidelines here does not mean that your job will start quickly. Nor does it keep track of downtimes at the remote sites. Its sole purpose is to help you avoid submitting jobs with disk/memory/cpu/site combinations that will never work. Limited offsite monitoring is available from https://fifemon.fnal.gov:3000/dashboard/db/offsite-monitoring

Organization

The following table lists the available OSG sites, their Glidein_site name (what you should put in the --site option), what experiment(s) the site will support, and finally and known limitations on disk, memory, or CPU.

NOTE: In many cases you may be able to request more than the jobsub defaults and be fine. We have not done detailed testing at each site to determine what the real limits are. If you do try a site and put in requirements that exceed the jobsub defaults, sometimes a

jobsub_q --better-analyze --jobid=<your job id>

will give you useful information about why a job doesn't start to run
(i.e. it may recommend lowering the disk or memory requirements to a certain value.)

NOTE 2: Under supported experiments, "All" means all experiments except for CDF, D0, and LSST. It does include DES and DUNE.

NOTE 3: The estimated maximum lifetim is just an estimate based on a periodic sampling of glidein lifetimes. It may change from time to time and it does NOT take into account any walltime limitations of the local job queues at the site itself. It also does not guarantee that there are resources available at any given moment to start a job with the longest possible lifetime.

Site Name --site option (sorted) Supported Experiments Known limitations Estimated maximum job lifetime
Brookhaven National Laboratory BNL All jobsub defaults are OK 24 h
Caltech T2 Caltech All jobsub defaults are OK; can go up to --memory=3000 25 h
Clemson Clemson All jobsub defaults are OK 24 h
Cornell Cornell All jobsub defaults are OK unknown
GPGrid FNAL All+CDF+LSST+DES+D0 new GPGrid accessed via FNAL Feb 2016, but job could end up on CMS T1 unknown
Fermi private cloud All memory up to 7500
--resource-provides usage_model=FERMICLOUD_PRIV,FERMICLOUD_PP_PRIV
4 days
FNAL CMS Tier 1 + GPGrid FNAL All jobsub defaults are OK 48 h
Czech Academy of Sciences FZU NOvA only request --disk=20000MB or less unknown
Harvard Harvard NOvA only jobsub defaults are OK; SL5 only unknown
University of Washington Hyak_CE All available resources vary widely; --memory=1900MB or less is better 3.5 h
University of Manchester Manchester uboone only can go up to --memory=8000 via multicore; disk default is OK between 12-24 h
ATLAS Great Lakes Tier 2 (AGLT2) Michigan All jobsub defaults are OK; can go up to --memory=2500MB unknown but at least 6 h
MIT MIT All + CDF opportunistic access currently disabled
jobsub defaults are OK
unknown
Midwest Tier2 MWT2 All jobsub defaults are OK
single core jobs will take a very long time to run if requesting more than 1920 MB of memory.
Running custom 3.x linux kernels, probably need to set UPS_OVERRIDE to setup products.
5 h
Red Nebraska All jobsub defaults are OK 48 h
Notre Dame NotreDame All jobsub defaults are OK; can go up to --memory=2500 ; aim for short jobs due to preemption 24 h
Tusker/Crane Omaha All jobsub defaults are OK; can go up to --memory=3000 24 h
Ohio Supercomputing Center OSC NOvA only jobsub defaults are OK 48 h
Southern Methodist University SMU NOvA only jobsub defaults are OK; SL5 only unknown
Southern Methodist SMU_HPC NOvA only single core jobs should request --memory=2500 or less 24 h
Syracuse SU-OG All request --disk=9000MB or less and --memory=2500MB or less
2015/10/15 libXpm.so not installed (may be required by ROOT) on all nodes
48 h
Texas Tech TTU All but mu2epro and seaquest jobsub defaults are OK
2015/11/20 down since OSG software upgrade
unknown
University of Chicago UChicago All linked with MWT2; recommend --memory=1920 or less for single-core jobs ; be sure to set UPS_OVERRIDE environment variable 5 h
University of California, San Diego UCSD All jobsub defaults are OK; can go up to --memory=4000 13 h
University of Bern UNIBE-LHEP uboone only 2000 MB memory or less; use >1 cpu for more memory 48 h
Grid Lab of Wisconsin (GLOW) Wisconsin All jobsub defaults are OK 24 h
Western Tier2 (SLAC) WT2 uboone only jobsub defaults are OK; can go up to --memory=2500MB 10 days