Project

General

Profile

Standard Star Instructions » History » Version 112

Douglas Tucker, 08/15/2017 06:00 PM

1 14 Douglas Tucker
h1. Standard Star Instructions
2 14 Douglas Tucker
3 101 Douglas Tucker
_(Author:  Douglas Tucker; Created: 29 Aug 2013; Updated: 28 Sep 2013; Updated 5 Aug 2014; Updated 21 Aug 2015; Updated 11 Aug 2016 by DLT and James Lasker; Updated 12 Aug 2016; Updated 22 Aug 2016; Updated 2 Sep 2016; Updated 10 Jan 2017; Updated: 15 Aug 2017)_
4 101 Douglas Tucker
5 107 Douglas Tucker
h2. Instructions for DES Year 5
6 101 Douglas Tucker
7 104 Douglas Tucker
*_In the Afternoon_*
8 101 Douglas Tucker
9 104 Douglas Tucker
* Run the kentools commands "ephem" and "standards" (described in the [[Introduction to kentools]]) to identify the appropriate sets of standard fields to observe that night.  E.g., for the night of August 15, 2017, we have:
10 102 Douglas Tucker
11 102 Douglas Tucker
<pre>
12 102 Douglas Tucker
prompt> ephem
13 102 Douglas Tucker
mjd 57981, date 20170815, Site CTIO, UT-offset 3 hr
14 102 Douglas Tucker
Current local time 13:59 CLST     UT 16:59     SidTim 09:54
15 102 Douglas Tucker
Sunset     19:25 CLST  22:25 UT   SidTim  230 deg
16 102 Douglas Tucker
Eve. -10   20:01 CLST  23:01 UT   SidTim  239 deg  Zeropoint; standards
17 102 Douglas Tucker
Eve. -14   20:20 CLST  23:20 UT   SidTim  244 deg  Begin obstac
18 102 Douglas Tucker
Eve. -18   20:39 CLST  23:39 UT   SidTim  248 deg  Last chance standards
19 102 Douglas Tucker
Midpoint   01:47 CLST  04:47 UT   SidTim  326 deg
20 102 Douglas Tucker
Moonrise   03:20 CLST  06:20 UT   SidTim  349 deg
21 102 Douglas Tucker
Morn -18   06:55 CLST  09:55 UT   SidTim   43 deg  Begin astronomical twilight
22 102 Douglas Tucker
Morn Std   07:13 CLST  10:13 UT   SidTim   47 deg  End obstac; begin standards
23 102 Douglas Tucker
Morn -10   07:33 CLST  10:33 UT   SidTim   52 deg
24 1 Douglas Tucker
Sunrise    08:09 CLST  11:09 UT   SidTim   61 deg
25 102 Douglas Tucker
Moon position (deg): RA 68.7, Dec 17.1 Phase: 0.448 
26 1 Douglas Tucker
</pre>
27 1 Douglas Tucker
28 104 Douglas Tucker
* The times of interest are "Eve. -10 (Zeropoint; standards)",  "Midpoint ()", and "Morn Std (End obstac; begin standards)":
29 1 Douglas Tucker
30 1 Douglas Tucker
<pre>
31 104 Douglas Tucker
prompt> standards 23:01
32 104 Douglas Tucker
UT Date = '2017/08/15 23:01'     Local time = 20:01
33 104 Douglas Tucker
SDSSJ1227-0000        ra 12:27:00  dec +00:00:00  secz 1.9
34 104 Douglas Tucker
E8-A                  ra 20:07:22  dec -44:37:01  secz 1.6
35 104 Douglas Tucker
SDSSJ1442-0005        ra 14:42:00  dec -00:05:00  secz 1.2
36 104 Douglas Tucker
37 104 Douglas Tucker
prompt> standards 04:47
38 104 Douglas Tucker
UT Date = '2017/08/16 04:47'     Local time = 01:47
39 104 Douglas Tucker
SDSSJ0100-0000        ra 01:00:00  dec +00:00:00  secz 1.8
40 104 Douglas Tucker
SDSSJ0000-0000        ra 00:00:00  dec +00:00:00  secz 1.4
41 104 Douglas Tucker
SDSSJ2140-0000        ra 21:40:00  dec +00:00:00  secz 1.2
42 104 Douglas Tucker
43 104 Douglas Tucker
44 1 Douglas Tucker
prompt> standards 10:13
45 1 Douglas Tucker
UT Date = '2017/08/16 10:13'     Local time = 07:13
46 104 Douglas Tucker
SDSSJ0000-0000        ra 00:00:00  dec +00:00:00  secz 1.7
47 104 Douglas Tucker
SDSSJ0100-0000        ra 01:00:00  dec +00:00:00  secz 1.4
48 1 Douglas Tucker
SDSSJ0320-0000        ra 03:20:00  dec +00:00:00  secz 1.2
49 1 Douglas Tucker
</pre>
50 1 Douglas Tucker
51 104 Douglas Tucker
* For a DES _*Full*_ night, we observe *_3_* standard star fields in evening twilight, and another *_3_* standard star fields in morning twilight.  For a DES Full night, we do not observe midpoint ("switchover") standards.
52 1 Douglas Tucker
53 112 Douglas Tucker
* For a DES _*First-Half_* night, we observe *_3_* standard star fields in evening twilight, and *_1_* standard star field just before midpoint ("switchover").  
54 104 Douglas Tucker
55 104 Douglas Tucker
* For a DES _*Second-Half_* night, we observe *_1_* standard star field just after midpoint ("switchover") and *_3_* standard star fields in morning twilight.
56 104 Douglas Tucker
57 104 Douglas Tucker
* Sometimes the "standards" command will will not be able to find a full set of 3 suitable standard star fields and will only return 2.  If it does so for an evening or a morning twilight, that is OK:  in that case, you will just observe those 2 fields during that twilight period. 
58 104 Douglas Tucker
59 104 Douglas Tucker
* For switchover, choose the highest airmass standard star field returned by the "standards" command for the night's midpoint.  (E.g., in the above example, we would choose the standard star field SDSSJ0100-0000, which is at an airmass ("secz") of 1.8 at 04:47UT.
60 104 Douglas Tucker
61 104 Douglas Tucker
62 111 Douglas Tucker
*_During Evening Twilight_*
63 107 Douglas Tucker
64 112 Douglas Tucker
* Unless otherwise instructed, use the _Yzirg_ standard star scripts.
65 1 Douglas Tucker
66 107 Douglas Tucker
67 1 Douglas Tucker
68 112 Douglas Tucker
69 1 Douglas Tucker
*_At Midpoint/Switchover (for DES Half-Nights only)_*
70 1 Douglas Tucker
71 112 Douglas Tucker
* Unless otherwise instructed, use the _grizY_ standard star scripts.
72 1 Douglas Tucker
73 112 Douglas Tucker
* _*(First-Half only:)*_  To avoid overrunning into the second half, we want to reserve about 7 minutes at the end of first half for slewing to and observing the mid-point standard star field -- i.e., the telescope probably should be slewing to the standard star field at about 4:40UT.
74 1 Douglas Tucker
75 1 Douglas Tucker
76 1 Douglas Tucker
77 112 Douglas Tucker
*_During Morning Twilight_*
78 1 Douglas Tucker
79 112 Douglas Tucker
* Unless otherwise instructed, use the _grizY_ standard star scripts.
80 112 Douglas Tucker
81 112 Douglas Tucker
82 112 Douglas Tucker
83 112 Douglas Tucker
*_General Advice_* 
84 112 Douglas Tucker
85 112 Douglas Tucker
* _*Don't bother with standards if the sky is obviously cloudy.*_  ("Obviously cloudy" == any clouds seen by eye outside higher than 20 degrees above the horizon, or moderate to heavy clouds seen on the RASICAM or TASCA displays.  If in doubt, take a full complement of standards.)
86 112 Douglas Tucker
87 112 Douglas Tucker
* _If heading into a (first half-night) switchover or heading into morning twilight, *don't interrupt a SN sequence just to start standards on time*, since SN sequences are basically "all-or-nothing" and we don't want to have to completely re-do a SN sequence the next night.  (It is however permissible to break into an obstac sequence of wide-field survey exposures to start standards on time.  Just let the current wide-field exposure to finish before moving on to standards.)_
88 112 Douglas Tucker
89 112 Douglas Tucker
* Standard star fields are typically widely separated and typically require long slews.  _To speed the process, the observers may want to observe the standards from East to West or from West to East, so the telescope doesn't need to slew back and forth over the sky._  (I.e., not from East to West and back to East again.)  Typically, this means observing the fields in order of either increasing RA or decreasing RA (minding the RA=360/0deg wrap!).
90 112 Douglas Tucker
91 1 Douglas Tucker
92 105 Douglas Tucker
----
93 105 Douglas Tucker
94 71 Douglas Tucker
h2. _*Special Instructions for DES Year 4*_
95 1 Douglas Tucker
96 84 Douglas Tucker
During DES Year 4, to help with the absolute calibration of the DES photometric system, we will be inter-mixing special HST CalSpec spectrophotometric standards in with the usual complement of nightly standards.  Not every night will have a CalSpec standard, but many of them will.  The CalSpec standards will be observed as part of the evening/morning twilight standard star observations.  To make things more transparent to the observer, a new standard star picker script has been built that outputs a triad of standards, one of which will be a CalSpec standard (if one is available).   The output for the CalSpec standard will be the name of a json file (e.g., "WD0308-565_CCD_52.json") to be used for that night (not only are there different stars, but, for the CalSpec program, we want to place the CalSpec standard on various CCDs on different nights and use different exposure times -- e.g., the json file "WD0308-565_CCD_52.json" is for placing CalSpec standard WD0308-565 on the DECam CCD 52 -- hence the multiple json files per CalSpec standard).  The json files for the CalSpec standards _*should*_ appear in the SISPI Exposure console menu, just like the json files for the normal nightly standards, but, just in case they don't, you can find them in the CalSpec subdirectory of either of these two directories on observer1/observer2/observer3: 
97 84 Douglas Tucker
  /usr/remote/user/DECamObserver/ExposureScripts/User_Standards 
98 71 Douglas Tucker
and 
99 84 Douglas Tucker
  /usr/remote/user/sispi/decam/ExposureScripts/DES/standards
100 90 Douglas Tucker
(The json scripts for the "normal" nightly standards are also under these two main directories, in the "grizY", "Yzirg", "ugrizY", and "Yzirgu" subdirectories.  The names of the subdirectories for the "normal" nightly standards describe which filters are used -- in particular, whether the u-band filter is used -- and whether one starts with the reddest filter (Y-band) or with the bluest ("u" or "g").) 
101 97 Douglas Tucker
_Note that we only have grizY json scripts for these special CalSpec program fields; so, if you have a special CalSpec program field during evening twilight, just use the provided grizY json script (i.e., don't try to create a Yzirg json script for the special CalSpec program field)._
102 71 Douglas Tucker
103 82 Douglas Tucker
_*To identify the appropriate triads of standard fields to observe, it is simplest just to run the kentools commands "ephem" and "calspec"  described in the [[Introduction to kentools]].  ("calspec" is the DES Year 4 equivalent of the kentools command "standards" used in previous years.)  Don't bother with standards if the sky is obviously cloudy, though.  ("Obviously cloudy" == any clouds seen by eye outside higher than 20 degrees above the horizon, or moderate to heavy clouds seen on the RASICAM or TASCA displays.  If in doubt, take a full complement of standards.)*_  
104 80 Douglas Tucker
105 99 Douglas Tucker
_*Caveat:*  The field C26202 is *both* a normal nightly standard star field *and* a special calspec program field.  If the kentools calspec commands returns "C26202/HST", use the normal nightly standard grizY or Yzirg script; if the command returns C26202_CCD_<NN>, where <NN> is a CCD number, use the appropriate calspec script, instead._
106 99 Douglas Tucker
107 99 Douglas Tucker
108 100 Douglas Tucker
*([Outdated:]* In additional, a lookup table, with entries in 15-minute increments, can be found here:  "NightlyAndCalSpecStandards.txt":https://cdcvs.fnal.gov/redmine/attachments/35837/NightlyAndCalSpecStandards.txt (Currently, it covers nights from August 14-September 5, 2016.)*)*
109 1 Douglas Tucker
110 1 Douglas Tucker
On full DES nights, observe standards during both evening and morning twilight (if sky is clear); on DES half-nights, observe standards during twilight and at the middle-of-the-night switchover.
111 82 Douglas Tucker
112 84 Douglas Tucker
* For evening/morning twilight, observe all 3 standards output by the "calspec" command
113 84 Douglas Tucker
** For the "normal" nightly standards, use the "Yzirg" scripts for evening twilight and the "grizY" scripts
114 84 Douglas Tucker
   for morning twilight and middle-of-the-night switchover observations (but, if you accidentally get this 
115 84 Douglas Tucker
   switched around, it is not a big deal). 
116 96 Douglas Tucker
** Standard star fields are typically widely separated and typically require wide slews.  *_To speed the process, the observers may want to observe the standards from East to West or from West to East, so the telescope doesn't need to slew back and forth over the sky._*  (I.e., not from East to West and back to East again.)  Typically, this means observing the fields in order of either increasing RA or decreasing RA (minding the RA=360/0deg wrap!)
117 71 Douglas Tucker
118 74 Douglas Tucker
* For the middle-of-the-night switchover, observe _*only one_* of the 3 standards output by the "calspec" command -- preferably the high-airmass standard.
119 71 Douglas Tucker
120 93 Douglas Tucker
* If heading into a (first half-night) switchover or heading into morning twilight, don't interrupt a SN sequence just to start standards on time, since SN sequences are basically "all-or-nothing" and we don't want to have to completely re-do a SN sequence the next night.  (It is however permissible to break into an obstac sequence of wide-field survey exposures to start standards on time.  Just let the current wide-field exposure to finish before moving on to standards.)
121 1 Douglas Tucker
122 106 Douglas Tucker
* For further details for the "normal" nightly standards, see the next section on "General Instructions":https://cdcvs.fnal.gov/redmine/projects/desops/wiki/Standard_Star_Instructions#section-4 .
123 1 Douglas Tucker
124 1 Douglas Tucker
For reference, here is a table of all standard star fields ("normal" nightly and "calspec") that the observer might expect to see: [[The DES Year 4 Standard Fields]].
125 106 Douglas Tucker
126 106 Douglas Tucker
----
127 106 Douglas Tucker
128 110 Douglas Tucker
h2. General Instructions (Primarily for DES Years 1, 2, 3; also some useful background for DES Year 5)
129 23 Douglas Tucker
130 68 Douglas Tucker
_*To cut to the chase, it is simplest just to run the kentools commands "ephem" and "standards"  described in the [[Introduction to kentools]] to find the appropriate triads of standard fields to observe.  If, however, you prefer tabulated lists, read the following and see the standard star look-up tables for each month below.  Don't bother with standards if the sky is obviously cloudy, though.  ("Obviously cloudy" == any clouds seen by eye outside higher than 20 degrees above the horizon, or moderate to heavy clouds seen on the RASICAM or TASCA displays.  If in doubt, take a full complement of standards.)*_
131 58 Douglas Tucker
132 69 Douglas Tucker
* Standard star fields are to be observed every evening and morning twilight (and, for half nights,  at switchover) that appear to be clear, where "clear" is determined by a quick visual inspection of the RASICAM image, of the TASCA image, or of the sky itself.  If in doubt, assume the sky is clear and take a full complement of standards.
133 1 Douglas Tucker
134 69 Douglas Tucker
* For evening twilight, the standards can begin about 45 minutes before the end of Astronomical (18-deg) Twilight.  If there is a late start, standards can continue until the end of Astronomical Twilight; after the end of Astronomical Twilight twilight, survey science observations must begin.
135 37 Douglas Tucker
136 1 Douglas Tucker
* For morning twilight, the standards should start 25 minutes after the start of Astronomical (18-deg) Twilight.
137 14 Douglas Tucker
138 69 Douglas Tucker
* If possible, for each twilight period, 3 standard star fields should be observed:  one at low airmass (X<1.25), on at medium airmass (X=1.25-1.65), and one at high airmass (X=1.65-2.10).  It is generally better to observe the high-airmass field first, since its airmass will be changing the most rapidly. _[Added 16 Dec 2013:]_ If you are comfortable doing so, you can try to arrange the observing sequence of the intermediate- and low-airmass fields so as to reduce slew time.
139 20 Douglas Tucker
140 69 Douglas Tucker
* For half-nights, 1 or 2 fields -- preferably a low-airmass field and a high-airmass field -- should be observed just before switchover.  (If only one field, a high-airmass field is preferred.)
141 1 Douglas Tucker
142 1 Douglas Tucker
* The list of DES standard star fields can be found here:  [[The Standard Fields]].  Note that they 
143 69 Douglas Tucker
are broken into 3 types:  a "Golden" sample, a "Silver" sample, and a "Bronze" sample.  The "Golden"
144 69 Douglas Tucker
sample fields, which have photometrically calibrated standards in all 5 DES filters (grizY) over the full DECam focal plane, take precedence.  The "Silver" and "Bronze" either are missing calibrated Y-band data or do not have calibrated standards just yet over the full DECam focal plane.  *Always make sure that at least one "Golden" (SDSS) standard star field is observed each clear night.*
145 51 Kevin Reil
146 69 Douglas Tucker
* For evening twilight, use the *DES/standard/Yzirg* scripts (which start with Y-band and end with g-band); for morning twilight or pre-switchover, use the *DES/standard/grizY* scripts (which start with g-band and end with Y-band).   (For those rare nights when we also observe in u-band, please use the corresponding "DES/standard/Yzirgu" and "DES/standard/ugrizY" scripts.)
147 63 Thomas Diehl
148 69 Douglas Tucker
* The script *DES/defocus_nightly.json* should be appended to the last evening standard. No "break" is needed.  The script stays on the last standard field, defocuses, takes a single r-band image and refocuses. Obstac can continue on from this point without trouble. If this script *fails* and the camera is out of focus press the z-trim button on the ICS screen. This nightly defocus script should be run about once a week. Keep track in elog and announce at the 4 o'clock meeting.
149 14 Douglas Tucker
150 69 Douglas Tucker
* There are several useful scripts in the StdStarPicker package in the DECamObserver account on observer2, including decamStdFieldsTimeDate.py and decamStdFieldsQueryNextSet.py.
151 14 Douglas Tucker
152 54 Douglas Tucker
* To get a full list of standard star fields that are in a good position to observe (airmass < 2.10, 
153 69 Douglas Tucker
moon separation > 15 deg, within Blanco horizon limits), use decamStdFieldsTimeDate.py:
154 14 Douglas Tucker
155 14 Douglas Tucker
<pre><code>
156 14 Douglas Tucker
  source ~/dtucker/bin/setup_StdStarFieldPicker.csh      (or .bash if you are using bash shell)
157 14 Douglas Tucker
158 14 Douglas Tucker
  decamStdFieldsTimeDate.py --help                       (for detailed help)
159 17 Douglas Tucker
  decamStdFieldsTimeDate.py --UT=now                     (for a list accessible right now)
160 1 Douglas Tucker
  decamStdFieldsTimeDate.py --UT='2013/09/17 00:43'      (for a list accessible at 00:43UT on Sept 17, 2013)
161 16 Douglas Tucker
162 54 Douglas Tucker
</code></pre>
163 54 Douglas Tucker
164 55 Douglas Tucker
* To get a preferred triad of standard fields -- a low-airmass field, a medium-airmass field, and a
165 69 Douglas Tucker
high-airmass field -- for a given time and date, use decamStdFieldsQueryNextSet.py *(Note:  the kentools command "standards" is a wrapper for this python script)*:
166 1 Douglas Tucker
167 17 Douglas Tucker
<pre><code>
168 73 Douglas Tucker
  source ~/dtucker/bin/setup_StdStarFieldPicker.csh        (or .bash if you are using bash shell)
169 14 Douglas Tucker
170 73 Douglas Tucker
  decamStdFieldsQueryNextSet.py --help                     (for detailed help)
171 73 Douglas Tucker
  decamStdFieldsQueryNextSet.py --UT=now -v                (for a triad accessible right now)
172 73 Douglas Tucker
  decamStdFieldsQueryNextSet.py --UT='2013/09/17 00:43' -v (for a triad accessible at 00:43UT on Sept 17, 2013)
173 1 Douglas Tucker
  
174 1 Douglas Tucker
  (Warning: decamStdFieldsQueryNextSet.py will output a default json file, "stdstar.json".  Just ignore it.)
175 1 Douglas Tucker
176 1 Douglas Tucker
</code></pre>
177 1 Douglas Tucker
178 66 Douglas Tucker
* *For simplicity, look-up tables -- one for each month of DES Year 2 Operations -- listing the preferred triad for each 15-min interval throughout each night, can be found here:*
179 41 Douglas Tucker
180 65 Douglas Tucker
> * "*listOfStdsByUT.Aug2015.txt*":https://cdcvs.fnal.gov/redmine/attachments/28515/listOfStdsByUT.Aug2015.txt 
181 57 Douglas Tucker
182 65 Douglas Tucker
> * "*listOfStdsByUT.Sep2015.txt*":https://cdcvs.fnal.gov/redmine/attachments/28516/listOfStdsByUT.Sep2015.txt
183 57 Douglas Tucker
184 65 Douglas Tucker
> * "*listOfStdsByUT.Oct2015.txt*":https://cdcvs.fnal.gov/redmine/attachments/28517/listOfStdsByUT.Oct2015.txt
185 57 Douglas Tucker
186 65 Douglas Tucker
> * "*listOfStdsByUT.Nov2015.txt*":https://cdcvs.fnal.gov/redmine/attachments/28518/listOfStdsByUT.Nov2015.txt
187 57 Douglas Tucker
188 65 Douglas Tucker
> * "*listOfStdsByUT.Dec2015.txt*":https://cdcvs.fnal.gov/redmine/attachments/28519/listOfStdsByUT.Dec2015.txt
189 57 Douglas Tucker
190 65 Douglas Tucker
> * "*listOfStdsByUT.Jan2016.txt*":https://cdcvs.fnal.gov/redmine/attachments/28520/listOfStdsByUT.Jan2016.txt
191 57 Douglas Tucker
192 65 Douglas Tucker
> * "*listOfStdsByUT.Feb2015.txt*":https://cdcvs.fnal.gov/redmine/attachments/28521/listOfStdsByUT.Feb2015.txt
193 60 Douglas Tucker
194 64 Douglas Tucker
(Old Year 1 and Year 2 versions can be found in the attached files below.  Note that the tables vary year-to-year, since Moon-avoidance is built into these tables and the Standard Star Picker tool from which these tables were derived.)
195 61 Douglas Tucker
196 1 Douglas Tucker
* _*You can also just run the the kentools commands "ephem" and "standards" described in the [[Introduction to kentools]] to find the appropriate triads of standard fields to observe.  This is usually the simplest option.*_
197 108 Douglas Tucker
198 108 Douglas Tucker
----
199 21 Douglas Tucker
200 1 Douglas Tucker
h2. Attachments